Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Paradise
Paradise is a tough place to put a roof. The sun here doesn’t let up, the desert grit gets into everything, and the heat bouncing off pavement and hardscape along the resort corridor can push roof surface temperatures well past what the air reads on your dashboard. If you’re in 89105 and thinking about metal, we know exactly what your roof is up against. Shepherd & Sons Roofing Boulder City handles metal roofing across Paradise, from standing seam on a mid-century ranch to repairs on a low-slope commercial parcel. Call (844) 761-8186 and a real person picks up.
Why Shepherd & Sons Roofing Boulder City Is Paradise’s Preferred Metal Roofing Company
Paradise homeowners have heard every pitch. The out-of-state crews roll in after a wind event, hand you a number on the phone, then show up at the door with a different one. We don’t play that game. Same name on the license, live person on the phone, and a written 90-Day Done Right Promise on every roofing job. If something’s off, one call brings us back to make it right.
Our techs bring up to 30 years of experience to Paradise roofs, and that matters here because the failure modes are local. In this unincorporated township, metal roofing has to be permitted through Clark County rather than a city building department, which changes submittal requirements and inspection sequencing on every standing-seam or metal-shingle job. We know the county process and scope it into the quote before anyone swings a hammer. You get no-hassle upfront pricing, a free second opinion on any written estimate, and no trip charge inside our own county.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Paradise
Standing Seam Metal Roof
Standing seam is the long-panel choice for Paradise homes that want a clean line and real longevity. The hidden-fastener design matters more here than rain protection: in the Mojave heat, panels expand and contract, and seams engineered for that movement hold up far better than exposed screws. We measure the roof in squares and walk you through the count before we talk money.

Metal Roof Repair
Most Paradise metal repair calls trace back to thermal cycling, not water. Fasteners work loose over years of heat, screw holes widen in the decking, and grit packs into panel valleys, trapping moisture against the underlayment. We diagnose the actual failure, then fix the flashing, fasteners, and seams rather than slap a patch on top.

Metal Roof Coating
A reflective coating can buy real years on a metal roof that’s still structurally sound but baking under Paradise’s UV. We look at the panel condition first; if the metal is sound, a proper coating helps cut heat load and slows corrosion at cut edges where desert grit does its damage. If the panels are too far gone, we’ll tell you straight instead of selling a coat over a failing roof.

Aluminum & Steel Roofing
Aluminum and steel both work in Paradise, but the choice depends on your panel profile, the pitch, and how much reflected heat it’ll see. We install products from Owens Corning, IKO, and Tamko alongside our metal line, so we can give you an honest comparison if metal isn’t the right fit for a particular slope or outbuilding. Ask anyone on your street: the name on the work is the name on the license.
Trusted Brands We Service in Paradise
We install products from Owens Corning, IKO, and Tamko, and we’ve set most of the metal profiles you’ll see on Paradise roofs. We don’t stock parts on trucks or run a warehouse; when we’re not set up for a specific panel, we bring it in fast so the job doesn’t stall. Name the shingle or panel and we’ve likely worked with it. If you’re weighing brands, we’ll explain the difference in plain terms, not brochure language.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Paradise Homes
- Thermal movement loosening fasteners. Standing-seam panels grow and shrink in the desert sun all day long. If the install didn’t account for that expansion, screws back out and the holes in the decking widen over time.
- Grit in the seams. Wind-blown desert dust collects in panel seams and valleys, holds a little moisture against the underlayment, and eats away at cut edges faster than anything on a rainy roof ever would.
- Underlayment that’s baked before the metal fails. The panels can look fine while the layer underneath has dried and cracked from decades of heat. That’s where hidden leaks start, at penetrations and ridge vents.
- Flashing that wasn’t built for the heat. Original flashing details meant for a milder climate can pull loose as metal expands. We see it on mid-century and 1970s-90s stucco homes across Paradise where the roof edge meets the sun-baked wall.
Pricing for Metal Roofing in Paradise, NV
Here’s roughly what metal work runs in the Paradise market. A standing seam roof on a typical Paradise home runs $9.50 to $16.00 per square foot installed, depending on profile, gauge, and how much tear-off is involved. Metal roof repair generally runs $275 to $900 for fastener, seam, and flashing work. A reflective metal roof coating runs $1.50 to $3.25 per square foot. Tear-off of old tile or flat roof adds to the number, and county permitting and ventilation work get scoped in before we quote, not surprise-billed afterward. Free estimates, written line by line. Call (844) 761-8186.
We Also Serve Cities Near Paradise
We also handle metal roofing in Paradise and the towns around it, including Winchester, Whitney, Spring Valley, and Enterprise. Same crew, same written promise, same straightforward pricing whether your roof sits in the county pocket or just down the road. If you’re not sure your address falls under our coverage, call and we’ll tell you straight.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Paradise
Yes. In Paradise’s unincorporated county pocket (ZIP 89105), metal roofing is permitted through Clark County rather than a city building department, so submittal requirements and inspection sequencing differ from a standard shingle job. We build that process into the scope before the first panel goes up. Call (844) 761-8186 to talk through your project.
In Paradise, the sun does more damage than rain ever will. The panels expand and contract under extreme Mojave UV, which loosens fasteners and widens screw holes in the decking if the install didn’t account for thermal movement. We spec fasteners and flashing engineered for that cycling, which is the difference between a roof that lasts and one that leaks at the seams in a few years.
Usually not safely, and here’s the local reason: underlayment beneath Paradise tile often dries out and cracks from decades of UV and heat long before the tile itself fails, so laying metal over it traps a dead layer underneath. On a typical Paradise retrofit, the right move is to tear off to the decking, replace any rotted sheathing, and start clean. We’ll show you the deck photos before we talk money, so you can see why.
Metal is measured in squares, and every 100 square feet is one square. Ask any bidder how many they counted; the number of squares plus panel profile, gauge, and tear-off scope drives the price. A standing seam roof in Paradise runs about $9.50 to $16.00 per square foot installed. Call (844) 761-8186 for an exact quote, free.
For most Paradise homes, standing seam aluminum or steel is the strongest choice because the hidden fasteners handle thermal cycling better than exposed screws. Aluminum resists corrosion well where grit traps moisture at cut edges, and steel offers good strength at a lower cost. We install both, plus products from Owens Corning, IKO, and Tamko, and we’ll recommend based on your roof rather than a sales target.
Metal roofing in Paradise is a sun problem, a wind problem, and a county-permit problem long before it’s a rain problem. That shapes how we scope every job: tear-off, underlayment, flashing, and ventilation get handled right the first time. Shepherd & Sons Roofing Boulder City gives you free estimates, a free second opinion on any written estimate, no trip charge inside our county, a Senior and Veteran 10% discount, and a written 90-Day Done Right Promise on every job. Call (844) 761-8186 to schedule your free estimate.
Written by the team at Shepherd & Sons Roofing Boulder City.