Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Why Boulder City Homeowners Choose CertainTeed Roofing
Shepherd & Sons Roofing Boulder City provides independent CertainTeed roofing service in Boulder City, NV: shingle replacement, leak repair, and valley repair on Landmark, Presidential, Grand Manor, and Carriage House roofs. What makes our CertainTeed work different is that we work to CertainTeed’s own published installation requirements for nail placement, fastener type, underlayment, and ventilation, and we can tell a genuine installation defect from ordinary desert aging. We’re an independent CertainTeed service provider, not affiliated with or authorized by CertainTeed. Call (844) 761-8186 to schedule a free estimate.

Why Trust Shepherd & Sons Roofing Boulder City for Your CertainTeed Roofing?
Our technicians have up to 30 years of experience, and a good share of that has been spent on CertainTeed roofs. That matters because CertainTeed publishes unusually explicit installation requirements: exactly where the fastener goes relative to the nail line, which fastener type is approved, how the underlayment laps at valleys and eaves, and how much net free ventilation the deck needs. An installer who reads those specs once and an installer who works to them every week end up with very different roofs ten years later.
We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so we’re not tied to one brand’s answer. When we look at a Boulder City CertainTeed roof, we can say plainly whether a lifted tab came from a high-nailed field, a short-lapped valley, or heat cycling, because we’ve set all of these products and seen how each one behaves under this sun.
Every roofing job we do carries the written 90-Day Done Right Promise. If it’s not done right, we make it right, and one call brings us back. A live person answers the phone 24/7, and you get a free second opinion on any written estimate you’ve already been handed.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Common CertainTeed Roofing Problems We Fix in Boulder City
- Landmark sealant strip failure after heat cycling. After enough summers, the sealant strip on Landmark and Landmark Pro shingles stops holding. The tabs lift and crease rather than tear cleanly, and once they’re standing up, the next monsoon wind gets under the field and peels a whole section. That creasing pattern is the tell: a torn tab usually means impact, while a creased tab usually means the sealant let go.
- UV granule loss and surface checking on south and west slopes. Boulder City sits a few hundred feet higher than Las Vegas, and that elevation means harder sun with nothing to break it. Landmark shingles on the south- and west-facing slopes routinely shed granules and check well before their rated life. That’s exposure, not a bad shingle, which is why we check the other slopes before blaming the product.
- High-nailed Landmark fields. Fasteners set above the nail line void coverage on Landmark, and we find a lot of it on Boulder City roofs. It often comes with a 4-nail pattern where the manufacturer’s high-wind pattern called for six. The nailing pattern earns the wind rating, not the shingle wrapper.
- Improperly lapped or missing Xtar underlayment. Xtar polymer-modified underlayment is only as good as its laps. When it’s lapped short at valleys, penetrations, or eaves, wind-driven monsoon rain gets behind the shingle course and shows up as a ceiling stain nowhere near the actual opening. These are the leaks we chase most in Boulder City.
- Ventilation shortfalls under Grand Manor and Carriage House. The heavy luxury profiles trap more heat at the deck than a standard architectural shingle. If the ridge and eave ventilation weren’t sized to the deck, the shingles above run hotter than they should, and the failure shows up early.
CertainTeed Parts & Our Repair-vs-Replace Approach
We match the existing CertainTeed shingle line and color lot wherever we can, and we use CertainTeed-approved underlayment and accessory components rather than generic substitutes at valleys, eaves, and penetrations. We don’t claim local parts stock; material gets sourced for your job, which is the honest way to say it.
For a localized failure, repairing with matching product is the right call. A few creased tabs on one slope after a wind event doesn’t mean a new roof. But once granule loss or sealant failure is spread across a whole slope, re-roofing that slope is cheaper than chasing it year after year. Mixed-brand patching on a CertainTeed field is something we advise against, because the next owner inherits a roof where nobody can tell what’s what. Call (844) 761-8186 and we’ll show you the deck photos before we talk money.
Our CertainTeed Service Process – Step by Step
- 1
Diagnosis. We get up on the roof and check the fastener placement against the nail line, confirm the nailing pattern, and inspect the underlayment laps at every valley, penetration, and eave. We photograph what we find.
- 2
Repair or install. We reset or replace affected tabs with matching CertainTeed product, rebuild valleys with new underlayment and a proper metal or woven detail, and correct nailing that’s out of spec on the section we’re working.
- 3
Check ventilation and water test. Ridge and eave ventilation get verified before we call anything done, then we water test the repair area. A repair that hasn’t been tested is a guess.
- 4
Warranty review. We walk you through how the repair affects your CertainTeed coverage and put the 90-Day Done Right Promise in writing on the job.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Products We Service & Install in Boulder City
We service and install the Landmark family (Landmark, Landmark Pro, and Landmark IR), the Presidential line including Presidential Shake and Presidential Solaris, and the luxury profiles: Grand Manor and Carriage House. Underlayment and deck protection are part of the work too, so that means Xtar polymer-modified underlayment and DiamondDeck roof deck protection. If you’re not sure which line is on your roof, we’ll identify it from the shingle itself and match the color lot for the repair.

We Also Service These Brands
Shepherd & Sons Roofing Boulder City works on GAF and Owens Corning roofs as well as CertainTeed, so you’re not getting a one-brand answer to a problem that might have a simpler fix. If your roof is a mix, we’ll tell you which products are where and what that means for repair options.
FAQs – CertainTeed Roofing Service in Boulder City
Is Shepherd & Sons Roofing Boulder City authorized by CertainTeed? No. We’re an independent CertainTeed service provider, not affiliated with or authorized by CertainTeed. We install and repair to the manufacturer’s published specs, and we’re upfront about that distinction. Call (844) 761-8186 for a free estimate.
Do you use genuine CertainTeed/OEM parts? We match the existing CertainTeed shingle line and color lot where possible, and we use CertainTeed-approved underlayment and accessories at valleys, eaves, and penetrations. For localized repairs, matching product is the honest call. Call (844) 761-8186 and we’ll tell you what your roof needs.
How long does CertainTeed service take? A localized repair (reset tabs, rebuild a valley section) is usually a one-day job. A full slope re-roof takes longer and depends on tear-off, material lead time, and weather. We’ll give you a realistic timeline in writing before work starts. Call (844) 761-8186 to schedule your free estimate.
What CertainTeed models/series do you cover? Landmark, Landmark Pro, Landmark IR, Presidential Shake, Presidential Solaris, Grand Manor, and Carriage House, plus Xtar underlayment and DiamondDeck deck protection. If you’re not sure which line you have, we’ll identify it on inspection.
Will service void my CertainTeed warranty? A repair done to CertainTeed’s specs with matching product generally preserves your coverage. Poor workmanship (high-nailing, short-lapped underlayment, mixed-brand patching) is what puts coverage at risk. Call (844) 761-8186 and we’ll review your roof against the installation requirements.
How much does CertainTeed roofing cost in Boulder City? Landmark shingle replacement typically runs $450 – $650 per square installed in the Boulder City market, valley rebuilds and leak repairs run $350 – $900 depending on access and extent, and Xtar underlayment replacement runs $150 – $250 per square. Color-lot matching and historic-district material choices can affect the number. Call (844) 761-8186 for an exact quote – estimates are free.
Book Your CertainTeed Service in Boulder City, NV
If your CertainTeed roof is creasing, shedding granules, or leaking at the valleys, call Shepherd & Sons Roofing Boulder City at (844) 761-8186 for a free estimate. A live person answers 24/7, we’ll show you the deck photos before we talk money, and every job carries the written 90-Day Done Right Promise. Historic District roofs welcome.
Written by the team at Shepherd & Sons Roofing Boulder City.