Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Metal Roofing in Boulder City: What to Know First
We handle independent CertainTeed metal roofing in Boulder City, and most straightforward repair and re-roof projects run two to five days once materials are on site. On price, you’ll know the number before anyone touches your roof: we give you a written, line-item estimate up front, and the 90-Day Done Right Promise backs every job in writing. There’s no trip charge inside our own county and a free second opinion on any estimate you’ve already been handed. This page is for homeowners here who own a CertainTeed metal roof, or are weighing one, and want straight answers on what actually fails and what it costs. Call (844) 761-8186 and a live person picks up.

How CertainTeed Products Fail – and How We Fix Them
Metal roofs are durable, but CertainTeed systems still have specific failure points, and where they show up first depends on the product line. Here’s what we actually find on Boulder City roofs:
- Fastener back-out and washer decay on CertainTeed standing seam panels. The concealed clips and fasteners hold the panel, but heat cycling and wind vibration work them loose over the years. When the gasketed screw washers dry out and crack, water sneaks in at the fastener line rather than the panel face. We pull the affected fasteners, replace the washers with correct EPDM-gasketed screws, and re-seat the clips. Boulder City’s big temperature swings between summer afternoons and cool desert nights speed this up more than most owners expect.
- Chalking and color fade on CertainTeed metal shingle and shake panels. Painted steel and aluminum panels chalk and lose sheen on south- and west-facing slopes first. That’s surface oxidation of the coating, not rust eating through. Real corrosion shows as blistering or red-brown staining from the cut edge inward. We inspect the panels before recommending coating, because if the steel is already compromised underneath, a coating just hides a problem you’ll pay for twice.
- Edge lifting and exposed fasteners on CertainTeed corrugated and 5V panels. On these exposed-fastener profiles, the perimeter fasteners and the closure strips at the eave and rake are the weak spot. Wind gets under a lifted edge, and once water drives sideways it finds the screw holes. We re-secure the perimeter, replace worn closure and trim pieces, and check the panel overlap sealant. Slope matters here: a low pitch that sheds fine most years can back up during a hard desert downpour.
- Dissimilar-metal corrosion where the CertainTeed roof meets other components. Where aluminum panels touch steel trim, copper flashing, or galvanized valleys without the right separation, you get galvanic corrosion. It shows as white powdery corrosion or pitting around the joint. Our fix is proper isolation with compatible metal or a barrier, then correcting the connection. This one is easy to miss and slow to reveal itself.
- Leaks at penetrations and valleys, not the field of the roof. Vents, skylights, and chimney flashing are where most CertainTeed metal leaks originate, especially where old flashing was reused during a prior install. We rebuild those transitions with correct CertainTeed or compatible flashing and check them against a real water test. The panel field is rarely the culprit; the joints are.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our CertainTeed Metal Roofing Process
Every CertainTeed job follows the same sequence, from your first call to the final walkaround:
- 1
Diagnostics and photos. We get up on the roof, find the actual source of the problem, and show you the photos before we talk money. No guessing from the driveway.
- 2
Parts decision. We use genuine CertainTeed parts where the panel system or warranty calls for it. Where an aftermarket flashing or fastener does the same job safely, we say so, and we explain the trade-off rather than billing the most expensive option by default.
- 3
The repair or install. Bill and his crew do the work themselves, matching panels, fasteners, and trim to the existing CertainTeed system. Nailing and fastening patterns follow the manufacturer spec, because that’s what earns the wind rating.
- 4
Water test and inspection. We check the finished area and surrounding transitions with water before calling it done.
- 5
Cleanup and walkaround. We clean the site and walk the roof with you, going over what we did and what to watch for.
- 6
The written 90-Day Done Right Promise. It’s on every job. If something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterWhat CertainTeed Metal Roofing Costs in Boulder City
Here’s the honest range for common CertainTeed metal scenarios in Boulder City. Your exact number depends on roof size, pitch, and how much is being repaired versus replaced. Ask any bidder how many squares they counted – that’s where quotes drift.
| Scope | Typical Range |
|---|---|
| Metal roof repair (fasteners, flashing, minor leak) | $350 – $1,800 |
| Metal roof coating / recoating | $1,200 – $4,000 |
| Partial re-roof or section replacement | $2,500 – $7,500 |
| Full CertainTeed metal roof replacement | $12,000 – $28,000+ |
What moves the price: roof size and complexity, pitch and access, how many penetrations and valleys, whether we reuse trim or replace it, and material choice. A free second opinion on a written estimate and no trip charge inside our own county. Call (844) 761-8186 and we’ll set up a free estimate.

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for CertainTeed Work
As an independent CertainTeed service provider, we’re not authorized or affiliated with CertainTeed, but we’ve worked on their metal systems long enough to know where they fail and how to fix them correctly. What you get is Bill and his crew on the roof, background-checked and doing the work themselves. A live person answers the phone 24/7, including after a storm, not a call center. We install and service products from GAF and Owens Corning too, so if a CertainTeed part is back-ordered, you’re not stuck. Same address since 1996, a license number you can look up, and a written 90-Day Done Right Promise. If it’s not right, we come back.
FAQs
Does repairing or re-roofing my CertainTeed metal roof void the warranty? Not if it’s done correctly, but the wrong parts or fastening can. CertainTeed warranties generally require proper installation and compatible components, so using the right CertainTeed or compatible parts and following the spec matters. We handle it with that in mind. Call (844) 761-8186 for a free estimate.
Can you get CertainTeed metal parts in Boulder City? Usually, though some specialty panels and trim are special-order and take a few days. We’ll tell you the real lead time up front. If a part is back-ordered, we can talk through your options. Call for a free estimate.
Should I repair or replace my CertainTeed metal roof? It depends on whether the steel or coating is compromised underneath. Localized issues like fasteners, flashing, or a section with edge damage can usually be repaired. Widespread corrosion, blistering, or persistent leaks at multiple points point toward replacement. We show you the photos and give you the straight answer. Call (844) 761-8186 for a free second opinion.
How fast can you get out to look at my CertainTeed roof? We’ll be there, and a live person answers the phone 24/7 so you’re not waiting on voicemail. Timing depends on the season and storm load, but we’ll give you a real window. No trip charge inside our own county. Call (844) 761-8186.
Do you service other metal roof brands besides CertainTeed? Yes, we also work on GAF and Owens Corning systems. If your roof is another brand, call us and ask, and we’ll tell you honestly if we can help. Estimates are free.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.