A Shepherd company - serving Boulder City, NV

Owens Corning Flashing Replacement in Boulder City, NV

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Owens Corning Flashing Replacement: The Boulder City Owner’s Guide

Replacing failed flashing around an Owens Corning roof in Boulder City typically runs $285 – $650 installed per location, depending on whether we’re reworking a chimney, a sidewall, or a skylight curb, and most single-location jobs are finished in a day. We install Owens Corning-compatible flashing and reflash over existing Owens Corning shingles without pulling the whole roof. Homeowners here usually discover the problem the same way: a brown ring on the ceiling below a chimney, grit and granules washed into a downspout, or a roofer up on the roof for something else who points at lifted metal and says, “that’s been letting water in for a while.”

Roofers installing heat-applied flat roofing material on a commercial building. in Boulder City, NV

Call (844) 761-8186

Key Takeaways

  • Most Owens Corning flashing failures in Boulder City show up at chimneys, sidewalls, and skylight curbs first.
  • We reflash over existing Owens Corning shingles instead of tearing the roof off.
  • Installed price runs $285 – $650 per location; estimates are free.
  • Every flashing job is backed by our written 90-Day Done Right Promise.
  • An independent roofer, not affiliated with Owens Corning, installs the work.

Which Owens Corning Models This Applies To

Flashing isn’t part of the shingle warranty line – Owens Corning sells shingles, underlayments, and accessories, but the metal flashing at penetrations is either contractor-supplied or a generic accessory. That matters, because it means you don’t need to match a “flashing model” to a shingle model. You match the flashing to the penetration. What you do want to know is what’s underneath: a Duration shingle roof from the 2000s will have a different underlayment situation than a newer one, and how we detail flashing depends on the shingle course you’ve got.

Here’s how to identify what you have. Look in the attic or garage for a leftover shingle wrapper – Duration, Oakridge, Supreme, or Berkshire are the common Owens Corning lines we see on Boulder City roofs. Note the color, because a reflash on a sun-faded roof should land in the closest current color to avoid a bright patch. Then measure the penetration (chimney width, curb dimensions) so the metal can be cut before anyone climbs up. We stock neither flashing nor shingles on a truck; parts are ordered to the job, so the measurement call matters. If the old flashing was a generic galvanized step flashing, we can often upgrade to a heavier gauge or a soldered copper – that’s the aftermarket call worth making here.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Signs Your Owens Corning Flashing Replacement Is Failing

Flashing fails quietly. Here’s what we look for and what it usually means.

  • Brown water stains on a ceiling or wall below the chimney. Water is getting behind the step flashing or the counterflashing, often where the sealant has cracked after years of Nevada sun cycling the metal.
  • Granules and grit washing out of a downspout near a wall or curb. Water is running under the shingles instead of over them, scouring the mat and carrying granules with it – a sign the flashing is no longer shedding water out.
  • Lifted, curled, or rusted metal at the penetration. Heat, UV, and thermal movement bend thin galvanized flashing over time; once it lifts, wind-driven rain blows in under it.
  • Daylight or a visible gap in the attic where the roof meets a wall. That gap is a flashing detail that has separated, and it’s a direct path for water and pests.
  • Moss, staining, or a soft spot near a chimney or skylight after a rain. Pooling water at a failed flashing detail is the classic tell; by the time you see it from below, the deck has usually been wet for a while.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what flashing replacement actually runs in Boulder City.

Roofers installing heat-applied flat roofing material on a commercial building. in Boulder City, NV
Job Typical Installed Range
Single sidewall or wall-to-roof detail $285 – $425
Chimney reflash (step + counterflashing) $425 – $650
Skylight curb reflash $385 – $600
Multiple penetrations or full-tie-in Quoted per job

The price covers tearing out the failed metal, inspecting and drying the deck if needed, new underlayment at the detail, new flashing set to the shingle course, re-sealing, and cleanup. What drives the range: accessibility, whether the deck is rotted, gauge or copper upgrade, and how many penetrations. Parts and labor are broken out on a written line-item estimate, so you see the metal’s cost separately from the work. Every flashing job carries our written 90-Day Done Right Promise – if it leaks, one call brings Bill back. Free second opinion on any written estimate you’ve already got.

DIY or Call Us?

You can safely check a few things: look for stains on ceilings and walls, check the attic for daylight at penetrations after a rain, and note lifted or rusted metal from the ground with binoculars. That’s diagnosis, not repair. Where DIY goes wrong is on the roof itself – flashing replacement means lifting shingle courses, working at height on a pitched surface, and getting the layering (underlayment, step flashing, shingle, counterflashing) in the right order. Get the order wrong and water finds it. On a two-story roof or a steep pitch, this is genuinely dangerous work, and we’d rather you didn’t. Call us at (844) 761-8186 and we’ll come look, no trip charge inside our own county.

FAQs

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch