Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Gutters & Accessories in Boulder City: What to Know First
We handle Boral gutters and accessories in Boulder City as an independent Boral service provider, and most straightforward jobs (a downspout reseat, a hanger repair, a section of gutter replaced) get done in one visit. A full seamless gutter run on a typical Boulder City single-story takes a couple of days from estimate to cleanup. Our pricing is upfront and written: we give you the number before anyone touches your gutter, and it doesn’t move once work starts.

This page is for the homeowner who already has Boral product on the house and wants someone who knows what’s actually up there, not someone who shows up guessing. If that’s you, call us at (844) 761-8186. You’ll get a live person, not a form.
How Boral Products Fail – and How We Fix Them
Boral makes a range of exterior products, and the gutters and accessories tied to a Boral installation in Boulder City tend to fail in predictable patterns. Here’s what we actually see on roofs around here, line by line.
- Seam separation on galvanized-style runs. Older Boral gutter sections that were seamed and sealed fail at the joint first, usually because the original sealant dried out through Boulder City’s summers. The symptom is a drip line that only shows up during a hard rain. We cut out the failed section and either reseam it or replace that run, depending on how much metal is left.
- Hanger pull-out on long runs. Boral installations that used spaced hangers on a long, unsupported run will sag once the spikes work loose. In Boulder City, where freeze events crack seals but heat drives expansion, those hangers walk out faster than owners expect. We reset hangers at tighter spacing and add support where the span was always too long.
- Downspout connections that loosen at the elbow. The joint between the drop and the elbow is the first thing to go. It’s a parts problem as much as a labor one: aftermarket elbows that don’t match the profile leak even when installed carefully. We match the profile instead of forcing a generic part.
- Gutter guard failures that back up, not overflow. Guards sold as universal fit on a Boral-tied installation don’t seat right on the profile, so debris gets under instead of running off. Water backs up under the shingle edge and rots fascia before anyone sees it. We fit guards to the actual profile on your roof, not a “one size fits most” panel.
- Fascia rot hidden behind a clean gutter face. This is the one homeowners miss. The gutter looks fine from the ground, but the wood behind it has been soaking for a season or more. We pull the gutter back, check the fascia, and replace what’s soft before we rehang anything.
Every one of these gets a written scope before we start, and a 90-Day Done Right Promise after we finish. If it’s not right, one call brings Bill back.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Boral Gutters & Accessories Process
A Boral job runs the same way every time, so you know what to expect from the phone call to the sweep-up.
- 1
You call and get a live person. No call center, no voicemail. We take down what you’re seeing and set a time that works.
- 2
We get up there and look. On the roof, not from the driveway. We check the gutter profile, the hangers, the downspout connections, and the fascia behind the gutter. You get photos.
- 3
We decide on parts. Sometimes the right call is the OEM profile so it matches what’s already there and the warranty stays intact. Sometimes a quality aftermarket part does the same job for less. We tell you which and why, and you decide.
- 4
We do the work. Bill and his crew on the roof, background-checked, and you know whose name is on the job.
- 5
We test it. Water on the roof, watching the downspouts. We don’t call a gutter done until we’ve seen it carry water.
- 6
Cleanup and the guarantee. We haul off debris and walk the property with you. The 90-Day Done Right Promise comes in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Gutters & Accessories Costs in Boulder City
Gutter work on a Boral installation here breaks down into a fairly predictable set of ranges. What moves the number is height, how much fascia repair is hiding behind the gutter, and whether we can match the OEM profile or need to go aftermarket.
- Gutter repair (reseal, reset, small section): $180 to $450
- Downspout repair or replacement: $150 to $400
- Fascia repair (per section, before rehang): $300 to $900
- Gutter guard installation: $8 to $18 per linear foot
- Seamless gutter replacement (per linear foot): $8 to $16
No trip charge inside our own county. If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it. Call (844) 761-8186 and we’ll get you an exact number.

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Boral Work
Same address since 1996, same name on the truck, same owner on the roof. That’s not a slogan, it’s the reason a Boulder City homeowner can call us back in three years and reach the same people. When out-of-state crews roll through after a storm and disappear, the phone number they left goes dead. Ours doesn’t.
Our technicians have up to 30 years of experience, and several have set enough Boral product that they know the profile by sight. We also install and service GAF, Owens Corning and CertainTeed, so we’re not learning your roof on your dime. Calls are answered by a live person 24/7, including after a storm. And the 90-Day Done Right Promise applies to every job, in writing.
FAQs
Not if it’s done correctly. Boral’s warranty covers defects in the product, not installation error, so the risk is a repair that uses the wrong profile or a bad fastener pattern. We keep the OEM profile where the warranty depends on it and document what we did. Call (844) 761-8186 and we’ll walk through your specific situation.
We try to match it, and in most Boulder City cases we can. If the exact Boral profile isn’t available, we tell you up front and offer a close aftermarket match so you’re not surprised by a seam that looks off. We never force a part and call it done.
Repair if the metal is sound and only the hangers, seams or connections have failed. Replace if the fascia behind the gutter is soft or the run has more patches than original metal. We’ll show you the photos and tell you straight which one makes sense.
We’ll set a time when you call and answer the phone live, including nights and weekends after a storm. Call (844) 761-8186 and we’ll find a slot that works for you.
Not inside our own county. Estimates are free, and if you’ve got a written estimate from another company, we’ll give you a free second opinion on it.
If you’ve got Boral gutters and something isn’t right, call Shepherd & Sons Roofing Boulder City at (844) 761-8186 for a free estimate. We’ll get on the roof, show you what’s going on, and give you a written number before anything starts.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.