Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Underlayment & Deck Repair: The Boulder City Owner’s Guide
We install Boral-compatible underlayment and deck repair in Boulder City, and most jobs land between $1,450 and $4,200 for a single-family roof section, depending on square footage, how much decking has to be replaced, and which underlayment you pick. Small patch repairs – one soft spot, one lifted seam – usually come in under $900. We can often get out to look at it within a day or two, and estimates are free. Most owners find out something is wrong the same way: a stain on the ceiling after a monsoon, a soft spot near the valley, or a roofer who was up there for something else and said the deck felt spongy underfoot.

Which Boral Models This Applies To
Boral stone-coated steel and composite tile roofs are the ones we see most in Boulder City, and the underlayment underneath is where the trouble usually starts, not the tile itself. The tile is a wear surface. The deck and the underlayment are the roof. So when we talk about a “Boral part” here, we mean the layers Boral’s install specs call for under their tile – the high-temp underlayment, the battens, the deck sheathing the whole thing sits on.
To match the right material, we need three things off your roof: the profile name (Boral Country Manor, Saxony 900, Timberline, or similar is usually stamped or noted on the original paperwork), the square footage of the field, and the deck thickness. Most Boulder City homes from the 1980s forward have 15/32″ or 19/32″ OSB or plywood decking. Older homes near the historic district sometimes have 1×6 skip sheathing, which changes the whole repair.
The OEM-versus-aftermarket call for Boral is straightforward, and we’ll say it plainly: Boral’s own branded underlayment is the safest match, but a high-temp cap sheet that meets the same spec is fine and often costs less. What matters is the temperature rating – stone-coated steel roofs get hot in Nevada sun, and a standard 30-pound felt won’t last. We install Boral products and also work with GAF, Owens Corning, and CertainTeed underlayments where the spec allows it. We’re an independent contractor and not affiliated with Boral.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your Boral Underlayment & Deck Repair Is Failing
- Water staining on the ceiling or top plate after a storm. The tile above looks fine, which is why owners are surprised. The underlayment has torn or aged through at a seam, and the tile is shedding water straight to the deck.
- A soft or spongy spot when you walk the roof or press near a valley. That’s decking that stayed wet too long. OSB delaminates from the inside out, and by the time it feels soft it’s already lost its strength.
- Lifted tile or visible batten sag. Battens hold the tile off the deck so water can drain. When the deck sags under a batten, the tile above it lifts and the next wind event finds it.
- Granule or material debris in the gutters after a dry spell. Underlayment doesn’t fail all at once. It dries, cracks, and sheds – and that debris shows up in the gutter before it shows up on your ceiling.
- Musty smell in an attic or vaulted ceiling. Trapped moisture under the tile. This is the one that gets missed. By the time you smell it, the deck repair is usually bigger than the underlayment repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how a Boulder City job prices out, parts and labor together:
- Small underlayment patch (under 200 sq ft): $650 to $1,200. Tile lifted, bad underlayment cut out, new high-temp material, tile reset.
- Deck repair plus underlayment, one section: $1,450 to $4,200. This is the common one. Soft decking cut out and replaced, new underlayment rolled, battens reset, tile reinstalled.
- Full underlayment replacement on a Boral tile roof: $3.50 to $6.50 per sq ft of roof area, tile lift and reset included.
The range depends on how much decking is soft, whether it’s a single story or two, and pitch. Steep sections and valleys cost more. We give you a written, line-item estimate that separates parts from labor, so you can see what the underlayment costs and what the deck repair costs. We pull permits when the scope needs one and pass the inspection. Every roofing job we do is covered by our written 90-Day Done Right Promise – if it’s not right, one call brings us back.
DIY or Call Us?
Some things you can check safely. Walk the perimeter of the roof at ground level and look for lifted tile, and check the gutters for grit after a windy week. A ceiling stain or a soft spot you find by feel, though, needs someone on the roof with the tile lifted – and that’s where DIY goes wrong. Boral tile is heavy and brittle, and a slipped tile or a misstep on a pitched roof is a hospital trip. The deck repair itself means cutting out sheathing and matching it to the existing framing. That’s not a weekend job.
We’ll get on the roof, take pictures, and show you the deck before we talk money. Call (844) 761-8186 and a live person picks up – day, night, or after a storm.
FAQs
Under Boral stone-coated tile, a high-temp underlayment should give you 20 to 30 years in our climate – but Boulder City’s summer heat and the UV load on a tile roof shorten that. We regularly see underlayment fail at 15 to 20 years on west- and south-facing slopes here, which is well before the tile shows any wear. Call (844) 761-8186 for a free inspection and an honest read on yours.
Yes, if the failure is localized. A single seam, a valley, or one soft panel can usually be patched without touching the rest of the roof. If the damage is spread across multiple slopes or the deck is soft in more than one area, a full underlayment replacement is cheaper over time than chasing leaks one at a time. Call (844) 761-8186 and we’ll tell you which one you’re looking at.
A single-section underlayment and deck repair usually runs one to two days on a typical Boulder City home. A full underlayment replacement on a Boral tile roof takes three to five days, depending on square footage and how much tile has to come up. Rain or wind delays can add time – we don’t leave a roof open, so we plan around the forecast.
We order to your roof’s specs – profile, square footage, and deck thickness – from suppliers who carry Boral and the matching high-temp underlayment. We don’t claim to stock parts or carry them on a truck; we order what your roof needs and schedule the install around delivery. Call (844) 761-8186 for a free estimate.
If your Boral roof has a ceiling stain, a soft spot, or gutters full of grit, call Shepherd & Sons Roofing Boulder City at (844) 761-8186 for a free estimate. We’re locally owned and owner-operated, same address since 1996, and we’ll show you the deck photos before we talk money. Every job is backed by our written 90-Day Done Right Promise, and standing offers – $40 Off Any Repair Over $200, a Free Second Opinion on any written estimate, No Trip Charge Inside Our Own County, and a Senior and Veteran 10% discount – are always available.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.