A Shepherd company - serving Boulder City, NV

Boral Roof Repair in Boulder City, NV

Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Roof Repair in Boulder City: What to Know First

We repair Boral roofing in Boulder City as an independent Boral service provider, and most jobs run one to two days once we know what failed. Expect a free look, deck photos, and a written number before anyone touches your roof – not a phone guess that changes at the door. This page is for Boulder City homeowners who already have Boral on the roof, whether that’s a concrete tile profile or a clay one, and who want a repair that holds up under our desert sun and monsoon rain rather than a patch that fails by the next season. Call (844) 761-8186 and a real person answers, any hour.

Professional roofing contractor performing a roof shingle repair. in Boulder City, NV

Call (844) 761-8186

How Boral Products Fail – and How We Fix Them

Boral makes tile and stone-coated products, and tile fails differently than asphalt shingles do. On a Boral roof the tiles themselves often outlast everything under them. Here’s what we actually find in Boulder City.

  • Underlayment wearing out before the tile (Boral concrete tile roofs). The tile can last decades, but the felt or membrane beneath it dries out and cracks in our heat, and that’s where the leak starts. The tile looks fine from the driveway while water finds its way through a failed underlayment. We lift the field, replace the underlayment and any rotted sheathing, then relay the original tile where it’s sound.
  • Cracked and slipped tiles after a freeze-thaw spell. Boulder City sits high and dry, but our winter nights still drop below freezing, and that cycle works on tile edges and hairline cracks. A single cracked field tile lets water straight to the deck. We swap the broken piece with a color-matched Boral replacement and reseat any tile that’s slid out of course.
  • Flashing and valley failures at wall and chimney transitions. Boral tile fields are heavy and unforgiving, and the metal flashing where a tile roof meets a wall or a valley is often a thin aftermarket piece that rusts through. Water backs up under the tile at the valley and hits the ceiling below. We rebuild the valley metal and the step flashing correctly, then tile back over it.
  • Fastener back-out and ridge loosening on stone-coated profiles. On Boral stone-coated steel profiles like the barrel and shake looks, wind and thermal movement work screws loose over time, and a lifted panel at the ridge is the tell. We refasten to the manufacturer’s pattern and replace any bent or stripped fasteners with the right corrosion-resistant screws.
  • Moss and algae on north-facing slopes. Shade and dust from the desert collect on the cooler north slopes, and the streaks and growth hold moisture against the surface. Left alone they break down the finish. We clean the slope without pressure damaging the coating, treat the growth, and check that the problem isn’t a venting issue underneath.

Here’s a detail you won’t read on Boral’s own site: on many tile profiles the small bird-stop and eave closures at the bottom course fall away first, and that’s how wind-driven monsoon rain gets under the field and soaks the underlayment at the eave. Homeowners blame the tile. The missing closure is the real culprit, and fixing it is cheap. We also know that a walking test on a Boral tile field is where a lot of leaks get created by people who don’t know where to put a foot – so the deck photos we take are how you’ll see the true condition, not by climbing up or trusting a bidder who walked it wrong.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Our Boral Roof Repair Process

  1. 1
    You call, and Bill listens. A live person picks up any hour. We ask what you’re seeing inside, where the stain is, and when it shows up, so we come out already suspecting the cause.
  2. 2
    We get on the roof and find the actual source. Leaks travel. A wet spot over the kitchen often starts ten feet uphill in a valley or at a vent boot. We trace it to the true source before quoting anything.
  3. 3
    We show you the deck photos before we talk money. You see the failed underlayment, the cracked tile, the rusted flashing – the evidence, up close. Then we give a written line-item number with no change orders.
  4. 4
    The parts decision, honestly made. If a Boral tile can be matched, we match it. If the exact profile is discontinued, we tell you straight and lay out a quality aftermarket match that blends, or a discreet patch in a spot that doesn’t show. We don’t swap in a mismatched tile and hope you don’t notice.
  5. 5
    The repair, done right the first time. Correct underlayment, correct flashing, correct fastening pattern, tile reseated to course. The nailing pattern earns the wind rating, not the label on the box.
  6. 6
    We test it and clean up. We hose-test the repair and check it from underneath where we can, then sweep the yard and haul off every scrap. One call brings Bill back if anything isn’t right – that’s the 90-Day Done Right Promise, in writing on every job.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Boral Roof Repair Costs in Boulder City

Most single-area Boral tile repairs in Boulder City land between $450 and $1,400, but it depends on what’s under the tile. Here’s roughly how the numbers break down:

  • Cracked or slipped tile replacement (a few pieces): $250 – $550
  • Vent boot or pipe flashing repair: $200 – $450
  • Valley or step flashing rebuild: $600 – $1,500
  • Underlayment repair in one field section: $900 – $2,800
  • Flat roof patch on a low-slope section: $400 – $1,200

What moves the price most: how much tile has to come up to reach the failed underlayment, whether the deck underneath is rotted, and whether a matching Boral profile is still available. If a discontinued tile forces a larger patch, that adds labor. We give you the real number up front from a free look. There’s no trip charge inside our county, and the $40 Off Any Repair Over $200 standing offer is always there. Call (844) 761-8186 for your free estimate.

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Boral Work

We’ve been at the same address since 1996, and Bill’s name is on the work and on the license. Out-of-state storm chasers roll through Boulder City after a monsoon and are gone before the leak comes back – ask them where their shop is. Our technicians have up to 30 years of experience, and Bill’s own sons are on the roof with him, background-checked and in the same crew you’ll see again at the hardware store on Saturday. We install and repair products from GAF, Owens Corning, and CertainTeed too, so we’re not pushing one brand – we’ll tell you honestly whether your Boral roof wants a repair or a replacement. Every job comes with the written 90-Day Done Right Promise.

FAQs

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch