A Shepherd company - serving Boulder City, NV

Boral Roof Replacement & Installation in Boulder City, NV

Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Roof Replacement & Installation in Boulder City: What to Know First

We install and replace Boral roofing in Boulder City as an independent Boral service provider, and most full replacements run five to eight working days from tear-off to cleanup. A tile roof here is real money, so we price it honestly up front. Once we’ve walked the roof and counted the squares, the number we give you is the number you pay, because a written line-item quote has no room for a surprise on the last day.

Roofers installing asphalt shingles during a professional roof replacement project. in Boulder City, NV

Call (844) 761-8186

This page is for homeowners whose Boral roof is failing, aging out, or getting past the point where patching makes sense. It’s also for anyone building new and trying to figure out which Boral line belongs on a Boulder City house.

Call (844) 761-8186 and a live person picks up, day or night. We’ll come out, get on the roof, and put the estimate in writing before you commit to anything.

How Boral Products Fail – and How We Fix Them

Boral makes clay and concrete roof tile plus a line of stone-coated steel, and the failures we see in Boulder City aren’t the same as what you’d read about on a manufacturer’s brochure. Here’s what actually shows up on roofs around here.

  • Hairline cracking on Boral concrete tile (Sakura and flat-profile lines). Your desert sun drives this. The daily heat swing from cool morning to a 100-degree afternoon expands and contracts concrete tile until micro-cracks open, and wind-driven rain pushes into them. We replace the cracked field tile and check the underlayment beneath, because once water is getting in, the felt is usually worn too. On a full replacement we’ll talk you toward an underlayment rated for high-heat exposure.
  • Fading and chalking on Boral stone-coated steel (the steel shake and tile-look lines). The color layer is a coating, and Boulder City’s UV load punishes it. When a roof chalks badly it’s usually because the panels sat on a hot truckbed before install or the coating wasn’t given a proper base. We check the panel finish before it goes up and won’t set a panel that looks sun-damaged out of the box.
  • Fastener corrosion and lifted tile after a wind event. Boral tile is heavy, but the mechanical hold on older roof installs can be a weak spot. In Boulder City we get spring gusts that peel back field tile and expose battens. Our fix is a full re-fasten and re-lay of the affected field, with a nailing pattern that earns the wind rating – the wrapper on the tile doesn’t do that, the nails do.
  • Underlayment rot beneath a perfectly good tile field. This is the one that fools people. The tile on top looks fine for twenty-plus years, but the felt underneath was never meant to last that long. You can’t see it from the driveway. We pull a test tile or two, look at the felt, and tell you straight whether you’re looking at a re-felt or a whole replacement. In Boulder City, where summer attic heat bakes that underlayment from below, this is the most common reason a “good-looking” Boral roof needs to come off.
  • Improper flashing at valleys and penetrations on older Boral installs. Tile roofs hide their flashing, and a lot of old jobs were flashed with material that has since rusted or was never lapped right. Water shows up as a stain on a ceiling months after the leak started. We rebuild the flashings properly when we replace, using material that matches the tile and holds up to the desert swing.
Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Our Boral Roof Replacement & Installation Process

  1. 1
    The call and the visit. You call and get a person, not a form. We set a time, and Bill or one of the crew comes out to walk the roof with you. We’ll tell you what we see on the deck before we talk money.
  2. 2
    The inspection and the count. We measure the roof in squares and check the deck, the flashings, and the underlayment. A roof is measured in squares – ask any bidder how many they counted, and you’ll learn a lot about who you’re talking to.
  3. 3
    The parts decision. On a Boral re-roof you may be choosing between OEM replacement tile and a good quality aftermarket tile that matches the profile. We’ll lay out both, including how each one affects your warranty, and let you decide. We install Boral, and we also set GAF, Owens Corning, and CertainTeed when the job calls for it.
  4. 4
    The work. Tear-off, deck repair if needed, new underlayment, flashing rebuild, then the tile field. Bill’s own sons are on the roof with him, and the crew is background-checked and uniformed. We protect the landscaping and keep the site clean as we go.
  5. 5
    The walk-through. We walk the finished roof with you, show you what we did, and hand over the paperwork. If something’s not right, you call and Bill comes back. That’s the 90-Day Done Right Promise, in writing on every job.
  6. 6
    Cleanup and haul-away. We get the old material and every stray nail off your property before we leave. You shouldn’t find tile shards in the flower bed a month later.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Boral Roof Replacement & Installation Costs in Boulder City

Tile isn’t shingle money, and we won’t pretend otherwise. Here’s the honest range for a Boulder City Boral roof:

Scenario Typical range
Partial tile repair and re-fasten (small field) $600 – $2,400
Re-felt under existing Boral tile (good tile reused) $9,000 – $18,000
Full Boral concrete tile replacement, standard roof $22,000 – $45,000
Boral stone-coated steel install $18,000 – $38,000
Decking replacement, per square $250 – $600 added

What moves the number: the size of the roof, the pitch, whether the deck is sound, and whether you’re reusing tile or setting new. Two-story work adds labor. Call (844) 761-8186 for an exact quote – estimates are free, and we’ll show you the deck photos before we quote a dollar.

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Boral Work

We’ve had the same address since 1996, and the name on the truck is the name on the license. That matters when the storm chasers roll through after a wind event and then disappear. We’re still here – the roofer your neighbor used, not a stranger with a clipboard.

A live person answers our phone 24/7, including after a storm. Bill and his crew have up to 30 years of experience on tile and steel roofs, and they’ve set enough Boral to know how it behaves in this climate. If you want a second set of eyes on a bid, we’ll give you a free second opinion on any written estimate. Installs come from Boral, and we set GAF, Owens Corning, and CertainTeed too – name the product and we’ve likely laid it. No trip charge inside our own county, a $40 discount on repairs over $200, and 10% off for seniors and veterans.

FAQs

Does replacing my Boral roof void the manufacturer warranty? It can if the install doesn’t follow Boral’s published requirements, which is why we install to spec and keep the paperwork. As an independent Boral service provider we’re not authorized by Boral, but we do the work the way their warranty requires. Call (844) 761-8186 and we’ll walk you through what your coverage needs.

Can you get the exact Boral tile to match my existing roof? Usually, yes, and when a color or profile is discontinued we’ll show you the closest match and explain the trade-off. We order tile before tear-off so your roof isn’t open waiting. Call us for an exact quote – estimates are free.

Should I repair my Boral roof or replace it? If the tile field is sound and the underlayment is the only problem, a re-felt can save you real money. If the tile is cracking across the field and the deck is soft, replacement is the honest answer. We’ll show you which one you’re looking at before we quote. Call (844) 761-8186.

How long does a Boral roof replacement take in Boulder City? A standard tile replacement runs five to eight working days, weather allowing. Bigger roofs and decking repairs push it longer, and we’ll give you a real timeline up front, not a sales promise.

Will the price change once work starts? No, not on a written line-item quote. If we open the deck and find rot we didn’t see, we stop and show you before we touch it. That’s how a fixed price stays fixed. Call (844) 761-8186 for your free estimate.

If your Boral roof is past patching, call (844) 761-8186 and a real person will pick up. We’ll come out, get on the roof, and put a fixed, line-item price in front of you before anyone touches a tile. Same address since 1996, license number you can look up, and the 90-Day Done Right Promise in writing on every job. Call (844) 761-8186 to schedule your free estimate.

Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch