A Shepherd company - serving Boulder City, NV

Boral Specialty Roofing in Boulder City, NV

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Specialty Roofing in Boulder City: What to Know First

We provide independent Boral specialty roofing across Boulder City – solar-ready low-slope systems, TPO, EPDM, modified bitumen, green roofs, and built-up roofing – and most residential jobs run two to five working days from tear-off to final inspection. We’re not the cheapest bid you’ll get, and we won’t pretend to be. We’re the Boral service provider that quotes what the roof actually needs, puts it in writing, and stands behind it with our 90-Day Done Right Promise.

professional specialty roofing service in Boulder City, NV

Call (844) 761-8186

This page is for the Boulder City homeowner who owns a Boral system and wants a straight answer about what’s failing, what it’ll cost, and who’s showing up. Call (844) 761-8186 and a live person picks up, day or night.

One thing up front: we’re an independent Boral service provider. We aren’t affiliated with or authorized by Boral. We install and repair their products and we know them well – that’s it.

How Boral Products Fail – and How We Fix Them

Boral specialty systems fail differently than asphalt shingle roofs fail. The failure modes are flatter, slower, and often invisible until a wet ceiling tells you. The guys on the roof know these products well – our technicians have up to 30 years of experience – and here’s what we see in Boulder City specifically.

  • Solar-ready membrane delamination (Boral Solar-Ready RhinoRoof and similar membrane skins). The solar-ready top ply gets bonded to an adhesive layer, and in Boulder City’s heat that bond is doing real work. UV cycling plus rooftop photovoltaics heat-back can lift the lamination at the seams first. We don’t just re-seal the edge – we check the deck for trapped moisture and re-bond with a manufacturer-compatible adhesive before we close it up.
  • Membrane seam lifting on flat TPO-style systems. Factory seams hold; field seams are where trouble starts. A hand-welded seam that didn’t get full heat fuses at maybe 60% its rated strength and opens over a Boulder City summer. We probe every seam, cut out the weak ones, and re-weld with a hot-air welder – not a torch, not a bucket of glue.
  • EPDM shrinkage at the perimeter. EPDM rubber shrinks over time, and here it pulls hardest at the edge, where it’s mechanically fastened. We see the membrane pull back from the metal, leaving a gap that swallows water. We reset the membrane with new batten, add termination bar where it belongs, and re-flash – not just caulk the gap and walk.
  • Modified bitumen surface blistering from granule loss. Torch-applied modified bitumen tops get granule wear, and underneath the granule is the asphalt layer that does the waterproofing. Once it’s gone, the sun works the asphalt. On a Boulder City flat roof we look for this on any cap sheet that’s over a decade old. We cap it with a UV-rated coating or replace the cap ply – whichever actually adds years, not months.
  • Built-up roof blistering and ponding. Multi-ply BUR systems trap moisture if the plies weren’t fully mopped or if vapor escaped the wrong way. You’ll see roping, soft spots, or standing water after a rain. We do a moisture scan, open the blister, dry it, and re-mop with a proper flood coat. If the whole field is saturated, we’ll tell you straight – a patch won’t save a wet roof.
Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Our Boral Specialty Roofing Process

Every Boral job follows the same path. No phone-quote-then-door-quote. No surprises after we open the roof.

  1. 1
    We look first. Someone from the crew comes out, gets on the roof, and photographs the deck before anyone talks money. You see the photos, not just a description.
  2. 2
    We diagnose the failure, not the symptom. Is it a seam? A drain? A perimeter? A moisture problem from inside? We trace it to the source for Boral systems, because fixing the wrong thing is how a repair becomes a replacement.
  3. 3
    Parts decision: OEM vs. quality aftermarket. For Boral membrane and accessory parts, we’ll tell you when OEM is the only warranty-safe choice and when a compatible aftermarket termination bar or fastener is genuinely just as good. Where it matters for your warranty, we go OEM. Where it doesn’t, we save you the markup.
  4. 4
    We do the repair or the install. Flat, low-slope, welded, or mechanically fastened – done to spec, with the nailing and fastening pattern that earns the rating, not the one that just passes.
  5. 5
    We test it. Water test on the repair area where we can. Walk the full seam line. Take photos before we close. If it’s not right, we’re not done.
  6. 6
    We clean up and hand it over. Debris gone, photos sent, line-item invoice, and the written 90-Day Done Right Promise. If something’s off in that window, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Boral Specialty Roofing Costs in Boulder City

Here’s honest pricing for what we actually see in Boulder City – not the lowball “ballpark” number you get on the phone.

Job Typical Range
Boral membrane repair (seam, blister, small patch) $650 – $1,800
EPDM or TPO perimeter reset and re-flash $1,200 – $2,800
Modified bitumen cap sheet replacement (per square) $500 – $750
Boral solar-ready roof section replacement $2,500 – $6,500
Small low-slope BUR or specialty roof replacement $12,000 – $28,000
Full solar-ready specialty roof install, residential priced by square – ask for a line-item quote

What moves the price: roof square footage and pitch, decking condition (soft deck adds tear-off and rebuild time), solar heat-back, drain work, and whether OEM-only parts are required for the warranty. Free estimates, no trip charge inside our own county. Call (844) 761-8186 to schedule.

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Boral Work

Same address since 1996. That’s not a slogan – it’s the reason you can look up the license, drive past the shop, and find us here after the storm chasers pack up. Bill Shepherd’s name is on the truck and on the work. Our technicians have up to 30 years of experience with specialty systems including Boral. We also install and service GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko, so you’re not stuck with one brand when the right answer is a different one.

Every Boral job carries the 90-Day Done Right Promise – in writing. A live person answers the phone 24/7, including after a storm. Free second opinion on any written estimate. And the standing offers don’t change: $40 off any repair over $200, no trip charge inside the county, and 10% off for seniors and veterans.

FAQs

Does repairing my Boral roof void the warranty? Not if it’s done with compatible materials and by a qualified installer – but improper repairs absolutely can. We keep the OEM-vs-aftermarket decision warranty-safe, document what we used, and give you a written record. Call (844) 761-8186 for a free second opinion on any written estimate.

Can you still get Boral parts for my roof in Boulder City? Usually, yes – Boral membrane and accessory parts are available, though lead times on some specialty items run weeks, not days. We’ll tell you the real timeline before you commit, and where a compatible quality aftermarket part will do the job without hurting the warranty, we’ll say so.

Should I repair or replace my Boral roof? If it’s one seam or a small blister and the rest of the field is sound, repair is usually the right call and repairs run $650 to $1,800. If the deck is soaked, the membrane has shrunk past re-flash, or you’ve got multiple failures across the field, replacement priced by the square makes more sense. We’ll show you the photos and let you decide. Call (844) 761-8186.

How fast can you get out to look at a Boral roof leak in Boulder City? We can’t promise same-day on planned specialty work, but a live person answers 24/7 and we’ll get a look scheduled as fast as the calendar allows. Call (844) 761-8186 and Bill will come out.

Do you pull the permits? Yes – permits are pulled and inspections passed on every job that requires them. Written line-item quotes, fixed pricing, no change orders without your sign-off.

Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch