Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Gutter Replacement: The Boulder City Owner’s Guide
We install CertainTeed-compatible gutter replacement on Boulder City homes, and most full runs land between $1,850 and $4,600 installed depending on linear footage, stories and hanger style. On most Boulder City jobs a full replacement is a planned job measured in days, not a same-day swap, and we’ll give you the number before anyone touches the fascia. Owners usually find out the gutter failed the same way: a rust-colored streak down the stucco after a monsoon, or water sheeting off a corner and pooling at the foundation. You go up with a flashlight, find a seam pulling apart or a hanger that let go, and that’s when the search starts.

CertainTeed is best known for shingles, but they also make the gutter systems and the accessory pieces that bolt onto a roof edge. If your home has CertainTeed runs or CertainTeed hangers, matching the profile and the wall thickness matters. We’ll cover what fits, what fails first, and what it costs in Boulder City.
Which CertainTeed Models This Applies To
CertainTeed residential gutter products come in K-style (the most common profile on Boulder City homes) and half-round, in aluminum and steel, in 5-inch and 6-inch widths. CertainTeed also makes hangers, end caps, outlets and downspout fittings. The reason this matters: a 5-inch CertainTeed K-style hanger won’t properly lock into a 6-inch run, and a half-round bracket won’t fit a K-style gutter at all. We see that mismatch constantly on Boulder City homes where the gutters were replaced piecemeal.
To identify what you have, look at three things. Measure the top opening across the gutter (5-inch or 6-inch is the call that decides everything else). Check the profile (flat back with a shaped front is K-style; a smooth semicircle is half-round). Then look for a stamp or tag on the end cap or hanger – CertainTeed marks its runs, and a coil sticker on the inside of the gutter is another giveaway on newer work.
On the OEM-versus-aftermarket question: CertainTeed accessories are the safest match when you’re replacing on a CertainTeed run. Quality aftermarket equivalents in matching gauge and profile work fine in most cases, and we’ll tell you plainly which one we’re using and why. What we don’t do is sell you a part that won’t seat. We also work with GAF and Owens Corning roof-edge components when the job calls for it.
One thing to say up front: Shepherd & Sons Roofing Boulder City is an independent service provider. We’re not affiliated with CertainTeed, and we don’t claim to be.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your CertainTeed Gutter Replacement Is Failing
Here’s what we actually find when we get up on a Boulder City roof:
- Seams pulling apart or leaking. CertainTeed K-style gutters are usually sealed at the joints with sealant or connected with a slip joint. Sealant fails first, especially after a summer of 100°F-plus days followed by a cold winter night. The seam opens, and the leak shows up as a streak on the fascia before you see it from the ground.
- Sagging runs between hangers. A hanger every 24 inches is the standard, but we regularly see 36-inch or wider spacing on Boulder City homes. Sun-load softens the aluminum over years, and the gutter sags. Sagging funnels water to the low spot and pulls the fasteners loose.
- Overflow at the corners during monsoon season. A downspout outlet that’s undersized or partially plugged, or a run that’s pitched wrong, sends water over the corner instead of down the downspout. In Boulder City, that water hits the foundation and shows up as a rust stain or a wet patch after a storm.
- Rust or pitting on steel gutters. Steel CertainTeed runs in Boulder City’s dry climate last well, but once the factory finish scratches (from a ladder, a branch, or hail), moisture starts the rust and it spreads along the run. Aluminum doesn’t rust through the same way but can pit and chalk.
- Fasteners pulling out of fascia. Fascia is typically wood on Boulder City homes. Wet wood rots, and a rotten fascia board won’t hold a screw. We chase the fastener back and find soft wood more often than we’d like, and that’s a fascia repair before the gutter goes back up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Boulder City, here’s the honest range for a full CertainTeed-compatible gutter replacement:

| Scope | Typical Installed Range (Boulder City) |
|---|---|
| Single-story, 5-inch K-style aluminum, 100-150 linear feet, with hangers and downspouts | $1,850 – $2,900 |
| Two-story or larger runs, 6-inch K-style, 150-250 linear feet | $2,900 – $4,600 |
| Fascia repair before re-hanging (rotted boards, soft sub-fascia) | Quoted line item, usually $8-$15 per linear foot of affected board |
What drives the range: linear footage, number of stories (two-story lift is slower and needs more hands), gauge and material, number of downspouts and outlets, and whether the fascia is sound. We quote the parts and labor separately and in writing. The workmanship carries our written 90-Day Done Right Promise – if it’s not done right, we make it right, on the record, with one call. $40 Off Any Repair Over $200 applies, and your estimate is free.
DIY or Call Us?
There’s honest overlap here. You can safely walk the perimeter with a ladder and look for the symptoms above, and you can clean out downspouts from the ground with a hose. What you shouldn’t do is get up on a two-story roof edge and try to re-hang a gutter or re-seal a seam yourself. Gutter work is height work, and the failure mode isn’t a leak – it’s a fall. Boulder City single-story roofs are often workable for a careful homeowner doing a visual check; anything taller, call us.
What also goes wrong in DIY: fasteners pull out of soft fascia because the wood was never replaced, sag re-appears in six months, and the pitch is wrong so water pools. We measured those correctly before we hang a run.
If you’d rather not be on the ladder, call (844) 761-8186 for a free estimate. A real person answers, and we don’t charge a trip charge inside our own county.
FAQs
Aluminum CertainTeed runs typically last 20-25 years in Boulder City’s dry climate, and steel runs can go longer if the finish stays intact. Boulder City’s heat, heavy summer monsoons, and occasional cold snaps are the three things that shorten life. Hangers and fasteners usually fail before the gutter itself does. Call (844) 761-8186 and we’ll give you a straight read on whether your run is close to the end.
Often, yes. A single pulling seam, a plugged downspout, or a loose hanger can be repaired, and that costs far less than a full replacement. We don’t push a full replacement when a repair will hold. Call (844) 761-8186 – we’ll look at it and give you the honest call, and the estimate is free.
A full CertainTeed-compatible replacement on a typical single-story Boulder City house runs one to two days of actual work, with two-story or longer runs taking longer. Monsoon season can push the schedule, so we build weather days into the quote. It’s a planned job – we’ll book it, not surprise you. Call (844) 761-8186 to schedule your free estimate.
We match the CertainTeed profile, width and gauge to what’s on your home and order from a supplier, or substitute a quality aftermarket equivalent in a matching gauge if it’s the better fit. We don’t carry CertainTeed parts on a truck and we don’t claim to. The part is ordered to spec, and we tell you which one we’re using before we start. Call (844) 761-8186 to start the estimate.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.