Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Specialty Roofing in Boulder City: What to Know First
We handle independent CertainTeed specialty roofing in Boulder City, from Solar Ready underlayment systems and TPO and EPDM membranes to modified bitumen, built-up, and green roof assemblies. A straightforward specialty repair usually wraps in one to three days once materials are on site; full membrane replacements on a flat or low-slope section typically run one to two weeks. We won’t hand you a number on the phone and a different one at the door – we look at the roof, show you what we find, and put a fixed, line-item price in writing before anyone touches a shingle.

This page is for the CertainTeed owner in Boulder City who already has the product on the roof and needs someone who knows how it goes together. Call (844) 761-8186 and a live person picks up, day or night.
How CertainTeed Products Fail – and How We Fix Them
CertainTeed makes good products. But every line has a weak spot, and in Boulder City’s sun and desert swing-temperatures those weak spots show up in predictable places. Here’s what we actually see on CertainTeed roofs around here, and how we make it right.
- Solar Ready underlayment seams lifting on low-slope sections. The self-adhered membrane CertainTeed sells under its Solar Ready line relies on a clean, dry, dust-free deck at install. On Boulder City roofs that baked through a hot summer before the solar went on, we find seams that never fully bonded and are now tenting at the laps. We don’t just press them back down – we cut back to sound material, prime the deck properly, and re-lap so it holds.
- TPO membrane seam failures at the weld. CertainTeed’s TPO is a solid single-ply, but heat-welded seams fail when the weld was run too cold or too fast, and the desert UV accelerates the cracking at those cold welds. We probe every seam, cut out the failed weld, and re-weld with a controlled hot-air run, then test it before we call it done.
- EPDM shrinkage and pull-away at terminations. EPDM in intense sun shrinks over time, and the pull shows up first at the perimeter terminations and around penetrations. The common “fix” of slapping sealant on it only hides the problem. We re-terminate the edge and add a proper batten or termination bar so the membrane has somewhere to move.
- Modified bitumen and built-up blisters from trapped moisture. On CertainTeed modified bitumen and built-up assemblies, a blister usually means moisture got into the deck or between plies and is now cooking under the sun. We open the blister, dry and assess the deck, and rebuild the plies rather than roofing over a wet spot that will fail again.
- Flashing and detail failures on green roof assemblies. Where a CertainTeed green roof system meets a curb, drain, or wall, the detail work is where water gets in – not the field membrane. We rebuild the flashing details and check drainage at the same time, because a green roof that ponds is a green roof that’s about to leak.
Here’s a detail you won’t find on CertainTeed’s own site: the Solar Ready and TPO seam problems above often trace back to the deck, not the membrane. If the sheathing wasn’t re-nailed and flattened before the membrane went down, the laps take the stress and fail early. As an independent CertainTeed service provider, we check the deck first on every job – that’s the difference between a repair that lasts and one that comes back.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our CertainTeed Specialty Roofing Process
Every CertainTeed job runs the same way, from the first call to the last sweep of the magnet.
- 1
Call and look. A live person answers, we set a time, and Bill comes out to see the roof. No phone quote, no guessing.
- 2
Diagnose the real cause. We get up on the roof, photograph what we find, and figure out whether it’s the membrane, the deck, the flashing, or the drainage – because fixing the wrong layer wastes your money.
- 3
Make the parts decision. Where it matters, we use CertainTeed OEM materials so the assembly stays warranty-safe. Where an aftermarket accessory is equal or better and saves you money, we tell you straight and let you choose.
- 4
Do the repair. Cut back to sound material, prep the deck, and rebuild the assembly the way the product is meant to go together – not the fast way.
- 5
Test it. We probe seams, check terminations, and water-test where it’s called for before we pack up.
- 6
Cover it in writing. The job is backed by our 90-Day Done Right Promise – if it’s not done right, we make it right, and one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat CertainTeed Specialty Roofing Costs in Boulder City
These are the honest ranges we see on CertainTeed specialty work in Boulder City. Every roof is different, so the only real number is the one we put in writing after we’ve looked.
| Job | Typical range |
|---|---|
| CertainTeed TPO seam repair (isolated welds) | $350 – $1,200 |
| EPDM re-termination and edge repair | $450 – $1,500 |
| Solar Ready underlayment re-lap on a low-slope section | $800 – $2,800 |
| Modified bitumen or built-up blister repair | $600 – $2,200 |
| TPO or EPDM membrane replacement (per section) | $2,500 – $9,000+ |
What moves the number: how much of the assembly has to come up, whether the deck is sound, how many penetrations and curbs the membrane has to seal around, and the size of the section. Free second opinion on any written estimate, no trip charge inside our own county, $40 off any repair over $200, and a 10% senior and veteran discount are always on the table. Call (844) 761-8186 for a free estimate.
Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for CertainTeed Work
We’ll show you the deck photos before we talk money. That’s not a slogan – it’s how Bill has run this shop since 1996, out of the same address the whole time, with his own sons on the roof alongside him. When a storm blows through and the phone is ringing, a real person still answers, day or night. We install and service certainteed products across the whole specialty line, and we also work with GAF and Owens Corning when that’s the right call. Our technicians have up to 30 years of experience, and every CertainTeed job comes with the written 90-Day Done Right Promise. Ask anyone on your street – the name on the truck is the name on the license.
FAQs
Not if the repair is done with warranty-safe materials and methods, which is what we aim for on every job. CertainTeed warranties generally require proper installation and, in some cases, a qualified installer; we use OEM materials where it matters and keep your assembly warranty-safe. Call (844) 761-8186 to talk through your specific product and situation – estimates are free.
We set the appointment when you call, and a live person answers 24/7 so we can get you on the schedule. For active leaks we’ll do what we can to stop the water fast, and diagnostic visits are scheduled promptly. Call (844) 761-8186 – no trip charge inside our own county.
If the failure is isolated – a few seams, one termination, a single blister – a repair usually makes more sense and costs far less. If the membrane is failing across the whole section or the deck underneath is compromised, replacement is the better long-term call. We’ll show you what we find and give you the honest answer both ways.
In most cases, yes. We work with the CertainTeed TPO, EPDM, Solar Ready, modified bitumen, built-up, and green roof lines, and we’ll confirm the exact product before we order anything. If a discontinued profile is the issue, we’ll tell you what the closest match is and what that means for the assembly.
Yes. If your roof mixes CertainTeed with GAF or Owens Corning products, we service those too and keep the whole assembly in mind. Call (844) 761-8186 for a free estimate and we’ll sort out what you’ve got.
Ready to get a straight answer on your CertainTeed roof in Boulder City? Call (844) 761-8186 for a free estimate – we’ll look at the roof, show you what we find, and put a fixed, line-item price in writing. Same address since 1996, and the 90-Day Done Right Promise on every job.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.