Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Metal Roofing in Boulder City: What to Know First
Shepherd & Sons Roofing Boulder City installs and repairs metal roofing on IKO homes across Boulder City, and most standard metal roof jobs run two to five days from tear-off to cleanup, depending on roof size and pitch. We give you a written line-item estimate before anyone touches your roof, and it doesn’t change once the work starts. We’re an independent IKO service provider, not affiliated with or authorized by IKO, so our loyalty is to you and the roof over your head, not a manufacturer’s sales sheet.

This page is for Boulder City homeowners who already have IKO products on their home and want metal roofing done right by people who know the material. Call (844) 761-8186 and a live person picks up, day or night.
How IKO Products Fail – and How We Fix Them
IKO makes solid products, but metal roofing on a Boulder City home lives under desert sun, monsoon wind, and wide temperature swings that test every seam and fastener. Here’s what we actually see on IKO jobs and how we handle it.
- Fastener back-out on IKO standing seam panels. The clips and screws that hold standing seam panels loosen as the metal expands and contracts through Boulder City’s hot days and cool nights. We re-torque to spec, replace gasketed fasteners with the correct OEM-matched washers, and check every clip, not just the loose ones.
- Gasket decay at penetrations. The rubber washers under screws dry out and crack faster here than most places because of the UV load, and that’s where leaks start, usually around vents and pipe boots. We replace the washers and reseal with UV-rated sealant matched to the panel finish.
- Chalking and fade on painted IKO metal finishes. The paint system on metal panels chalks and fades under Boulder City’s sun. When the finish is still sound underneath, a proper metal roof coating buys years. When it isn’t, coating hides a problem instead of fixing it, and we’ll tell you which one you’ve got.
- Oil-canning and panel distortion. Wider panels can dimple or “oil-can” when they’re fastened too tight or installed over an uneven deck. We check the deck, correct the fastening pattern, and explain what the panel can actually take before we touch it.
- Valley and edge corrosion on corrugated and metal shingle roofs. Cut edges and valleys trap debris and moisture, and that’s where rust shows first on corrugated and metal shingle profiles. We clean the valleys, treat the corrosion, and refasten or replace panels as needed.
None of these are reasons to panic. Most are repairable, and knowing the real cause saves you from paying for a whole new roof you don’t need yet.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our IKO Metal Roofing Process
- 1
You call, a real person answers. Not a call center, not voicemail. Tell us what you’re seeing and we’ll set a time to come out.
- 2
We look at the roof and show you what we find. Bill and his crew get up on the roof, take photos, and show you the deck and the panels before we talk money. No trip charge inside our own county.
- 3
We decide OEM versus aftermarket parts. Sometimes the right IKO-matched fastener or flashing is the answer; sometimes a quality aftermarket part does the same job for less. We tell you which and why, so the warranty stays intact where it matters.
- 4
We do the repair or install. New standing seam, metal shingle, corrugated, aluminum or steel panels, a targeted repair, or a coating, whichever your roof actually needs. Bill’s own sons are on the roof with him.
- 5
We test it. Water test at penetrations and seams, walk the whole roof, and clean up like we were never there.
- 6
It’s backed in writing. Every roofing job carries our 90-Day Done Right Promise. If it’s not done right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat IKO Metal Roofing Costs in Boulder City
These are real ranges for IKO metal roofing work in Boulder City. Your exact number depends on roof size, pitch, panel type, and how much deck repair is needed, which is why we put it in writing before we start.
| Job | Typical Range |
|---|---|
| Metal roof repair (fasteners, flashing, small leaks) | $350 – $1,200 |
| Metal roof coating | $2,500 – $6,500 |
| Corrugated or metal shingle roof replacement | $12,000 – $22,000 |
| Standing seam metal roof (aluminum or steel) | $18,000 – $35,000 |
What moves the price: roof size in squares, pitch and how many stories, panel type and finish, how much of the deck needs repair, and whether the old roof has to come off first. Ask any bidder how many squares they counted. Call (844) 761-8186 for a free estimate, and we’ll give you a free second opinion on any written bid you’ve already got.
Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for IKO Work
We’ve had the same address since 1996, and Bill Shepherd’s name and license number are on the work. Out-of-state storm chasers roll through Boulder City after every big wind and are gone by the time you find the leak they missed. We’re still here.

Our technicians have up to 30 years of experience, and they know IKO metal roofing inside and out: the fastening patterns, the gaskets, the finishes, and what holds up in this climate. We also install GAF, Owens Corning, and CertainTeed products, so if IKO isn’t the right fit for your roof, we’ll tell you straight and show you the alternatives. We also offer $40 off any repair over $200, a 10% senior and veteran discount, and free second opinions on any written estimate.
FAQs
It can, if the wrong parts or methods are used. We use IKO-matched or equivalent-quality fasteners and flashings and follow installation practices that keep your warranty intact wherever possible, and we’ll tell you upfront if a repair could affect coverage.
Yes. We source IKO-matched fasteners, washers, and flashing for metal roofing jobs, and when a quality aftermarket part does the same job we’ll explain the trade-off so you decide.
It depends on the problem. Localized leaks, back-out fasteners, or worn gaskets are usually worth repairing. Widespread corrosion, failed seams across the whole roof, or a compromised deck usually points to replacement, and we’ll show you photos of the roof so you can see why.
Most repairs are done in a day, and full metal roof replacements typically run two to five days depending on size and weather. We’ll give you a realistic timeline in writing with your estimate.
Yes. We’ll look at any written estimate you’ve received and give you an honest second opinion at no charge, no hassle and no pressure.
Call (844) 761-8186 for a free estimate on your IKO metal roofing in Boulder City, and a live person will pick up whenever you call.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.