A Shepherd company - serving Boulder City, NV

Owens Corning Metal Roofing in Boulder City, NV

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Owens Corning Metal Roofing in Boulder City: What to Know First

We install and repair Owens Corning metal roofing in Boulder City as an independent Owens Corning service provider, which means we work with the product but aren’t authorized or sponsored by the manufacturer. Most residential metal jobs here run three to six days from tear-off to final walk-through, depending on roof size and how much deck repair turns up. On price: a straight standing seam job usually lands between $14 and $26 per square foot installed, and we’d rather tell you that on the phone than surprise you at the door.

Workers installing metal roofing panels on a residential home in Boulder City, NV

Call (844) 761-8186

This page is for Boulder City homeowners who already have an Owens Corning roof or are weighing one, and who want straight answers about how the metal lines actually hold up in our climate – not a sales sheet. Call (844) 761-8186 and a live person will pick up, day or night.

How Owens Corning Products Fail – and How We Fix Them

Metal roofing fails differently than asphalt, and the Owens Corning lines we see across Boulder City have their own patterns. Here’s what actually shows up on the deck and what we do about it.

  • Fastener back-out on steel panels. The screws holding a corrugated or low-profile steel panel work loose over time as the roof expands and cycles through Boulder City’s 40-plus degree day-to-night swing. What looks like a leak is usually a backed-out fastener with a compressed gasket. We replace the screws with OEM-gauge fasteners and re-set the gasket, then check every fastener row, not just the wet one.
  • Galvalume edge rust on cut panels. Any field-cut end of a Galvalume steel panel loses its protective coating and starts to rust at the cut within a few seasons in our dry, sunny air. It’s the single most misdiagnosed problem we see – homeowners assume the whole panel is failing when it’s just the edge. We treat and reseal the cut edge and replace only what’s actually compromised.
  • Granule loss and fading on stone-coated metal shingles. Owens Corning’s stone-coated steel shingle products look like tile or shake but the granule coat can thin and fade under Boulder City’s intense UV. Fading alone isn’t failure; granule loss down to bare metal is. We tell you which one you have before recommending anything.
  • Sealant failure at penetrations and valleys. Pipe boots, vent flanges, and valley closures on any metal roof rely on sealant that dries and cracks faster here than in wetter climates. We cut out the old sealant, prime, and re-seal with a metal-rated product rather than smearing new caulk over the crack.
  • Panel oil-canning and oil-can dents. Long steel panels sometimes show wavy distortion from installation tension or thermal movement. It’s cosmetic most of the time, but if it’s paired with a leak, the panel or the fastening pattern is the cause – and the fix is structural, not a patch.

One thing you won’t read on Owens Corning’s site: on a lot of Boulder City roofs, the leak people blame on the metal is actually coming from the underlayment or a failed flashing at a wall, and the panel above it is fine. That’s why we get on the roof and look before we quote.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Our Owens Corning Metal Roofing Process

  1. 1
    We come out and look. Bill or one of his sons walks the roof with you, shows you the deck and the problem areas in photos, and tells you what we found before any number gets said.
  2. 2
    We figure out what’s actually wrong. Failed sealant, a backed-out fastener, rusted cut edge, or a panel that needs to come off – each one is a different job and a different price.
  3. 3
    Parts decision, out loud. We use OEM Owens Corning components and fasteners where they matter for warranty and fit, and we’ll tell you when a quality aftermarket part does the job just as well for less. No guessing, no upcharge games.
  4. 4
    We do the work. Straight-line repair or full install, permits pulled where they’re required, inspection scheduled and passed.
  5. 5
    We test it. Water test at penetrations and valleys before we call it done.
  6. 6
    You get it in writing. Every roofing job comes with our 90-Day Done Right Promise – if it’s not right, one call brings Bill back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Owens Corning Metal Roofing Costs in Boulder City

Real ranges, not a teaser. These are the numbers Boulder City homeowners actually see from us:

Job Typical Price Range
Metal roof repair (fasteners, sealant, small panel) $350 – $1,200
Standing seam metal roof, installed $14 – $26 per sq ft
Metal shingle roofing (stone-coated), installed $11 – $19 per sq ft
Corrugated metal roofing, installed $9 – $15 per sq ft
Metal roof coating / reseal $2 – $5 per sq ft

What moves the price: roof size and pitch, how much deck repair we find after tear-off, whether the old roof needs a full removal, and panel type. A short phone call gives you a real ballpark. Estimates are free, and we’ll do a free second opinion on any written estimate you’ve already got. Call (844) 761-8186.

Workers installing metal roofing panels on a residential home in Boulder City, NV

Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Owens Corning Work

We’ve had the same address since 1996, and Bill’s name is on the license and on the truck – so when a storm chaser quotes you one number on the phone and another at the door, you already know where to find us. Our technicians have up to 30 years of experience, and Bill’s own sons are on the roof with him, background-checked and in uniform. We install and service GAF and CertainTeed products too, so if Owens Corning isn’t the right fit for your roof, we’ll say so. A live person answers the phone 24/7, including nights and weekends after a storm. No trip charge inside our own county.

FAQs

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch