Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Tile Roofing in Boulder City: What to Know First
We provide independent Tamko tile roofing in Boulder City, and most tile repairs here are finished in one to three days once we’ve seen the deck. A full tile replacement on a Tamko underlayment system usually runs one to two weeks depending on the size of the roof and how much tile we can save and re-lay. You’ll get a written, line-item price before anyone touches your roof, and estimates are free.

This page is for Boulder City homeowners who own a Tamko product under tile and want straight answers: what’s likely failing, what it costs, and whether it can be repaired or needs to be replaced. We’re an independent Tamko service provider, not affiliated with or authorized by Tamko, so we have no reason to sell you a brand you don’t need. If you want to talk it through, call us at (844) 761-8186 and a real person picks up.
How Tamko Products Fail – and How We Fix Them
Tile roofs in Boulder City live hard. The sun cooks the underlayment, the monsoon rains push sideways, and the temperature swings crack anything that wasn’t installed with room to move. Tamko makes solid products, but every line has a weak point, and after a few decades those weak points show up in predictable places. Here’s what we actually find on Tamko jobs around town.
- Tamko underlayment drying out under tile. This is the number one issue. The tile up top looks fine, but the Tamko felt or synthetic underlayment beneath has baked brittle from 25-plus years of desert sun. You won’t see it from the ground. Our fix is pulling the tile, replacing the underlayment with a quality modern membrane, and re-laying the original tile where it’s sound. We show you the old underlayment in a photo or in person before we talk money.
- Cracked and slipped concrete tile from thermal movement. Concrete tile expands and contracts through Boulder City’s hot days and cool nights. When the fasteners or battens don’t leave room to move, tiles crack or slide out of line. We reset the field, replace broken pieces, and check the nailing pattern on every row so the fix holds through the next summer.
- Flashing failures at valleys and chimneys. Where tile meets a valley or chimney, the Tamko flashing and the tile have to work as one system. We routinely see old flashing pulled loose or rusted through, letting water creep behind the tile. We rebuild those transitions and seal them properly rather than smearing caulk over the problem.
- UV damage at ridge caps and hips. Ridge and hip areas catch the most direct sun, and Tamko ridge products and their sealants weather fastest there. Lifted or crumbly ridge caps let water in and loosen the tiles around them. We re-bed and re-secure the ridge line and check every hip down to the eave.
- Fastener and batten corrosion. In older Tamko tile assemblies, the nails or battens can rust or loosen and stop holding the tile. When we find that, we replace the compromised battens and fasteners rather than nail new tile into a bad base that will fail again in a few years.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Tamko Tile Roofing Process
Every Tamko job follows the same path, and you know the number before we start. Here’s how it runs from your first call to the final walk-around:
- 1
We come out and look at the deck, not just the tile. The tile on top tells you half the story. We lift tiles, check the underlayment, flashing, battens, and fasteners, and photograph what we find so you’re seeing the same thing we are.
- 2
We decide repair or replacement honestly. If the underlayment is sound and the problem is localized, we repair. If the Tamko underlayment has dried out across the field, we tell you straight that a patch won’t hold and lay out the replacement option in writing.
- 3
We make the parts call. For tile roofing, the underlayment, flashing, and fasteners are what really matter. We use quality materials that meet or beat the original spec and match your existing tile profile, and we explain the OEM versus aftermarket trade-off so you understand what you’re paying for.
- 4
We do the work. Tiles come up in order, the failing layer gets replaced, and the assembly goes back down with the right nailing pattern and spacing for Boulder City’s temperature swings. Bill and his crew are on the roof, not a subcontractor you’ll never see again.
- 5
We water-test and walk it with you. Before we load up, we check water flow at the valleys and penetrations and show you the finished work.
- 6
The 90-Day Done Right Promise goes in writing. If something isn’t right after we’re gone, one call brings Bill back to make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Tamko Tile Roofing Costs in Boulder City
Tile work prices by the job, not by a phone guess, because the deck underneath can change the whole picture once we lift a few tiles. Here are the ranges we see for common Tamko tile jobs in Boulder City:
- Tile repair (cracked, slipped, or missing tiles, flashing touch-up): typically a few hundred dollars, with the exact figure depending on how many tiles and how much flashing is involved.
- Localized underlayment repair under tile: priced by the section, since lifting and re-laying tile is careful labor.
- Full Tamko underlayment replacement (re-laying your existing tile): a mid-range, per-square project that’s smaller than a full replacement because the tile is reused.
- Full tile roof replacement with new underlayment and flashings: a larger investment, quoted line by line.
What moves the price: roof size, how many tiles can be saved, how many valleys and penetrations there are, and how much of the batten and fastener base needs work. Call (844) 761-8186 to schedule a free estimate. We’ll bring the deck photos and give you a written price before anyone touches your roof.
Why Boulder City Homeowners Call Shepherd & Sons Roofing Boulder City for Tamko Work
We’ve been at the same address since 1996, and our technicians have up to 30 years of experience on tile roofs like yours. When you call, a live person answers, not a voicemail box or a form that goes nowhere. Bill’s name is on the work and on the license, so you know exactly who’s accountable when something needs a second look. The crew is background-checked and uniformed, and Bill’s own sons are on the roof with him.
We also install and service GAF, Owens Corning, and CertainTeed products, so if a different brand is the better answer for your roof, we’ll say so. Every Tamko job we do is backed by the written 90-Day Done Right Promise, and we offer a Free Second Opinion on any written estimate plus no trip charge inside our county. If you’re a senior or a veteran, there’s a 10% discount waiting for you. Same name on the truck, same name on the license.
FAQs
Not when the work is done to spec with compatible materials. Tamko’s warranty covers its products, not the installation, so the key is using a quality underlayment and correct installation so nothing in your assembly gives Tamko a reason to deny a claim. We use materials that meet or beat the original spec and document what we installed, so you’re covered if a product issue ever comes up. Call (844) 761-8186 for a free estimate and we’ll walk you through it.
Yes. For tile roofing, the Tamko components that matter are the underlayment and flashing accessories, and those are still available in current, upgraded versions. The tile itself is separate from the Tamko system, so if you need matching tile we’ll track down a profile that fits or tell you honestly when a match isn’t possible. As an independent Tamko service provider, we’ll give you the straight answer on what’s available.
Repair if the underlayment is sound and the problem is localized to flashing, a few cracked tiles, or one valley. Replace if the Tamko underlayment has dried out across the field, because in Boulder City’s sun that brittle felt won’t hold a patch. We lift tiles and check before we recommend either, so the call is based on what’s actually under your roof, not a sales pitch.
Because the tile is the rain screen and the underlayment underneath is what actually keeps water out. In Boulder City, 25-plus years of UV bakes the Tamko underlayment until it cracks, and water gets through even though the tile looks intact from the ground. That’s the most common leak cause we find, and we show you the failed underlayment before we quote the fix. Call (844) 761-8186 for a free estimate.
For a storm or active leak, call and a live person answers night or weekend, and Bill will come out to stop the water first. For planned repairs and replacements, we schedule at your convenience and give you a written estimate up front. Either way, estimates are free and there’s no trip charge inside our county.
Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City and nearby areas.
Ready for a straight answer on your Tamko tile roof? Call (844) 761-8186 for a free estimate. We’ll show you the deck photos, give you a written line-item price, and back the work with our 90-Day Done Right Promise. A real person answers, day or night.