Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Boulder City
If you’re re-roofing a home in Boulder City, you already know this town doesn’t work like the rest of the valley. The Historic District near Nevada Way and the old Bureau of Reclamation blocks don’t hand out material approvals just because a panel is cheap. We know the difference between a roof that passes inspection and one that clears design review, and we plan for both before anyone touches your deck. Call (844) 761-8186 for a straight answer and a free estimate. You’ll talk to a real person, not a form.
Why Shepherd & Sons Roofing Boulder City Is Boulder City’s Preferred Metal Roofing Company
Boulder City homeowners have seen what happens when an out-of-state outfit rolls through after a monsoon and disappears before the first leak shows up. We’re the other kind of roofer: locally owned and owner-operated, with a published license number you can look up and a face you’ll see again at the store on a Saturday. Every roofing job carries our written 90-Day Done Right Promise – if it isn’t done right, one call brings us back. That pledge is in writing, not a handshake you have to remember later.
A live person answers the phone here 24/7, including nights and weekends after a storm. No call center, no voicemail tree. We know the difference between a home up by Bootleg Canyon and a bungalow in the Historic District, because we’ve worked both sides of town. When you call about a metal roof in Boulder City, you’re talking to people who understand this community’s rules, not a contractor reading from a script.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Boulder City
Metal is the right long-term answer for a lot of Boulder City roofs, but only if it’s detailed for our sun and our monsoon gusts. Here’s how we approach the work, and which panels fit which roof.
Standing Seam Metal Roof
Standing seam is the panel we recommend most in Boulder City, because the concealed fasteners mean no exposed screw holes to wallow out under gusting wind. On the low-slope roofs of the 1930s core, we set the panels with the clip spacing and fastener pattern the wind rating actually requires, then document it. The clean vertical lines also tend to clear Historic District design review more easily than a busy exposed-fastener look.

Metal Shingle Roofing
When a Boulder City home needs to keep a traditional profile, metal shingle gives you the look of the original roof with a metal core. It’s a strong fit for mid-century infill homes that want to match their neighbors’ character. We walk the color and profile against the historic guidelines before we order a single square.

Corrugated Metal Roofing
Corrugated panels are affordable and common on outbuildings and utility roofs around Boulder City, and they do fine when they’re fastened correctly. The catch is that exposed screws can back out or widen their holes under our wind gusts, so the washer and fastener schedule matters more than the panel itself. We use corrugated where it makes sense and tell you where it won’t.

Aluminum & Steel Roofing
Aluminum and steel both handle the intense desert sun, but they behave differently. Steel is stronger and holds up to wind-driven rain at the edges; aluminum resists corrosion and stays lighter on an older deck. For the 1930s core, we often lean toward one over the other based on what the tear-off reveals. That’s why we look at the deck before we talk metal.
Trusted Brands We Service in Boulder City
We install products from Owens Corning, IKO, Atlas and Tamko, and we name the panel and the profile so you know exactly what’s going on your Boulder City roof. That means written, line-item specs, not a vague “premium metal system” on the bid. We don’t stock parts in a local yard, so turnaround depends on the material order and, in the Historic District, on design review sign-off. Once the order clears, we move.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Boulder City Homes
Most metal roofing calls we get here come down to a handful of repeat failure points. Our higher elevation than Las Vegas means hard sun, monsoon wind-driven rain, and the occasional winter cold snap – all of which stress the same weak spots.
- UV-baked underlayment and sealant. The sun cooks the underlayment and caulk at flashing and penetrations first, and then monsoon rain tracks right under the panel edges. That’s the real failure mode here, not snow load.
- Backed-out or wallowed fasteners on corrugated panels. Exposed screws work loose or widen their holes under Boulder City’s wind gusts, and the leak shows up at the eave and ridge. A repair that just adds new screws usually buys a season, not a fix.
- Unapproved profile or color substitutions. In the Historic District, a panel or color swapped in without design review approval can force a full tear-off and re-order of the whole square count. The order has to wait on approval, not the other way around.
- Failed flashing at valleys, penetrations and the drip edge. On the old low-slope and tile roofs of the 1930s core, these are the spots monsoon gusts find first. Wind-driven rain works under lifted edges once the seal has baked out.
Pricing for Metal Roofing in Boulder City, NV
Here’s what metal roofing runs in Boulder City. A typical standing seam install runs about $14 to $22 per square foot installed, so a 1,500-square-foot roof often lands in the $21,000 to $33,000 range. Metal shingle roofing runs $11 to $16 per square foot, and corrugated metal roofing runs $8 to $13 per square foot installed. Aluminum and steel differ by material and gauge. Metal roof repair is usually quoted by the leak, often $400 to $1,200 depending on how much flashing and underlayment has to be pulled back to sound decking. Two things push cost up here: a 1930s bungalow often needs careful, piece-by-piece tear-off and matching materials, and a Historic District job adds design review coordination before material can be ordered. A cheap bid is usually cheap because it skips the wind-rating detailing, the underlayment at the perimeter, or the review step. Call (844) 761-8186 for a free, written line-item estimate.
We Also Serve Cities Near Boulder City
We take care of metal roofing in Boulder City and the surrounding communities, including Henderson, Whitney, Paradise and Enterprise. If you’re just over the hill or down the road toward the valley, the same crew and the same written promise apply. Visit our Boulder City page to see how we handle this area, or head to our Metal Roofing hub for the full picture on panels, ratings and materials.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Boulder City
Yes. Any roof change in Boulder City’s Historic District that alters material, color or panel profile typically has to clear design review before it goes on the roof. The review can deny a look that passes every wind and permit check, so we clear the guidelines before a single panel or coil is ordered. Call (844) 761-8186 and we’ll walk you through what the review expects.
A Boulder City metal roof should be detailed and documented to meet the wind speed the local code requires for your exposure, with the clip spacing and fastener pattern to match. The rating lives in the detailing and the paper trail, not the shingle wrapper. If a bid can’t show you the fastener schedule, ask why. Call (844) 761-8186 for a quote that spells it out.
Compare them line by line on the things that decide long-term performance: the panel and gauge, the wind rating and fastener schedule, the underlayment at perimeter and penetrations, the tear-off scope, and whether permits and inspections are included. Ask each bidder how many squares they counted. The lower number with no detail usually isn’t the cheaper roof. Call (844) 761-8186 for a free second opinion on any written estimate.
Yes. A documented, code-compliant metal roof with proper wind-load detailing and a clean permit and inspection record gives your insurer clear evidence the work was done right, which can matter when a wind-driven rain claim comes up. It also helps at resale. We keep the paperwork straight so you have it when you need it. Call (844) 761-8186 to talk it through.
Because the old low-slope and tile roofs of the 1930s core often hide original or heavily patched layers that have to come off carefully without damaging the deck, and matching materials to the historic character adds work. That tear-off labor and the design review coordination are why the square-foot price runs higher here than on a newer subdivision roof. Call (844) 761-8186 for an estimate that reflects the real scope.
Metal roofing in Boulder City has more moving parts than most towns: historic review, wind detailing, permits and a paper trail that follows the house. We’ll show you the deck photos before we talk money, hand you a written line-item quote, and answer the phone when you call. Reach out at (844) 761-8186 for a free estimate. Our technicians have up to 30 years of experience, and every job is backed by our written 90-Day Done Right Promise.
Written by the team at Shepherd & Sons Roofing Boulder City.