Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Whitney
If you live in Whitney and you’re tired of replacing builder-grade shingles every 12 to 15 years, a metal roof is worth pricing. Whitney’s 89122 tract homes take a beating from 110-degree summers and monsoon wind, and metal holds up where asphalt gives out. We’re Shepherd & Sons Roofing Boulder City, and we know this pocket of unincorporated Clark County street by street – the subdivisions off Boulder Highway, the older roof decks, the county permit process that catches out-of-town contractors off guard. Bill Shepherd shows you the deck photos before he talks money. Call (844) 761-8186 and a live person picks up, day or night.
Why Shepherd & Sons Roofing Boulder City Is Whitney’s Preferred Metal Roofing Company
We’re locally owned and owner-operated, and Bill’s name is on the license and on the work. That matters in a place like Whitney, where storm chasers roll through after every monsoon season and then vanish. Homeowners here have heard the phone quote that turns into a door quote, and they’re done with it. We give you a free second opinion on any written estimate so you know your number before anyone climbs your roof.
Every roofing job we do comes with the written 90-Day Done Right Promise – if it’s not done right, one call brings Bill back to fix it. Not a call center. Not voicemail. A live person answers the phone around the clock, including storm nights when your panels are lifting. When we serve Whitney, we handle the Clark County paperwork and stand behind the install. Ask anyone on your street – the name on the truck is the name on the license.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Whitney
Standing Seam Metal Roof
Standing seam is the workhorse for Whitney’s low-slope and steep-slope sections alike. The raised seams hide fasteners, which matters when monsoon dust and grit would otherwise work their way under a panel edge. We install standing seam over solid new underlayment, and the fastener pattern is set to the wind uplift the panel profile calls for – the nailing pattern earns the wind rating, not the panel wrapper.

Metal Roof Repair
Plenty of Whitney calls are repairs, not full roofs: a few panels lifted by a microburst, a ridge cap that pulled loose, fasteners backing out of decking that swelled after a past leak. We diagnose the deck first, because bolting new panels onto rotten framing just moves the problem. A small repair on a Whitney roof typically runs $350 to $900 depending on access and how much flashing is involved.

Aluminum & Steel Roofing
Aluminum resists corrosion well in dusty, hot conditions; steel is heavier and takes impact better. We set both, and we’ll tell you which fits your pitch and budget instead of upselling the pricier panel. Steel runs a little less than aluminum per square foot in this market, but the deck condition often decides which way we go. We install products from Owens Corning, IKO and Atlas where the system calls for them.

Corrugated Metal Roofing
Corrugated is the budget-friendly way into metal, common on sheds, patio covers and low-slope additions around Whitney. It’s exposed-fastener, so we space and seal the screws to handle the thermal swing between 110-degree afternoons and cool desert nights. Get that spacing wrong and the panels oil-can and open up at the fasteners within a couple of seasons.
Trusted Brands We Service in Whitney
We install products from Owens Corning, IKO, Atlas and Tamko, and we’ve set enough of them to know how each one behaves under Whitney’s sun and dust. We don’t stock parts and we don’t pretend to – a metal roof is ordered to your measurements, so there’s no “one size fits all” panel sitting on a shelf. Name the shingle or panel line and we’ve likely set it. Turnaround is quick once the deck is sound and the Clark County permit is in hand: measurements, order, install, inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Whitney Homes
- Monsoon wind uplift at panel edges and ridge caps. Sealant and backer rods that baked out in 110-degree heat let go first, and the next gust peels the edge. If your ridge cap is rattling after a storm, that’s the tell.
- Dust and sand abrasion clogging seams and drains. Blowing grit packs into seams and scuppers until a monsoon downpour backs water up under the panels. The roof looks fine in dry weather and leaks the day it rains hard.
- Fastener back-out and corrosion on aged decking. On original 1980s to 2000s decking that swelled or delaminated from past leaks, screws work loose and steel starts to rust. Loose fasteners are a sign the underlying deck, not the panel, is the real problem.
- Builder-grade shingles hiding a rough deck. Many Whitney homes were shingled over decking that was never inspected for rot. When we tear off, we find the plywood that needs replacing before any metal goes down.
Pricing for Metal Roofing in Whitney, NV
Here’s an honest ballpark for Whitney’s market. A typical standing seam metal roof runs $1,100 to $1,800 per square (100 square feet) installed, or roughly $22,000 to $45,000 for a standard Whitney tract home depending on roof size and pitch. Corrugated metal lands lower, about $700 to $1,200 per square. Metal roof repair in Whitney usually runs $350 to $900. What moves the number: whether the old shingles get torn off (they usually should here), how much decking needs replacing, panel profile, and the valley and penetration flashing. We write it line by line, and if a surprise turns up once the deck is open, it gets priced and approved in writing before we touch it. Every estimate is free.
We Also Serve Cities Near Whitney
Whitney sits close to a lot of the valley, and we serve the neighborhoods around it too. If you’re in Sunrise Manor, Winchester, Paradise or Las Vegas, the metal work is the same and the local knowledge carries over. See our full Metal Roofing service for the bigger picture, then call to get your roof on the schedule.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Whitney
Yes. Whitney is unincorporated Clark County, so there’s no city building department here – every metal roof pulls a Clark County permit and inspection. That’s the single biggest thing that surprises homeowners, and it’s why out-of-town contractors used to Henderson or Las Vegas proper get caught flat-footed. County inspectors check the structural attachment of the panels to the existing decking, not just the panels themselves. We handle the permit and stand for the inspection. Call (844) 761-8186 for a free estimate.
Check the roof deck and framing for water damage or rot first, because bolting new panels onto soft or delaminated 1980s-2000s plywood just moves the problem. A qualified crew tears off the old shingles, inspects the deck, replaces bad sheathing, and lays new underlayment and ice-and-water shield in the valleys and around penetrations – then attaches panels with a fastener pattern set to the panel profile and wind uplift. Any framing repairs get priced and approved in writing before panels go on. Call for a free estimate on your Whitney home.
Metal outlasts asphalt here by a wide margin. Summer highs in Whitney routinely hit 105 to 115 degrees, which bakes shingles, drives granule loss and breaks down sealant in 12 to 15 years – while metal reflects heat and doesn’t lose granules. Blowing dust does abrade seams and clog drains, so metal still needs occasional cleaning, but it holds up far better than the builder-grade shingles most Whitney roofs started with. Call us to price a metal upgrade.
Yes, when the panels and the deck are done right. Standing seam with concealed fasteners and a properly set ridge cap handles monsoon gusts far better than exposed-fastener systems where sealant has baked out in the heat. The wind rating comes from the fastener pattern and how well the system anchors to sound decking, not from a label on the panel. That’s exactly what the Clark County inspection verifies. Call (844) 761-8186 for a free second opinion on any written metal quote.
Metal roofing is measured in squares – 100 square feet – so ask any bidder how many they counted and whether the price is per square installed. Get the roof size in writing, whether tear-off is included, how much decking replacement is allowed before extra cost, and the panel profile and fastener pattern. A straight number with those details beats a lowball every time. Our estimates are free and line-item.
Ready to stop patching and start pricing? A metal roof on a Whitney home is a long-term call, and we want you to make it with real numbers and real photos, not a phone quote that changes at the door. Bill and the crew will show you the deck, write the estimate line by line, pull the Clark County permit, and back the job with the written 90-Day Done Right Promise. Same address since 1996, same name on the truck. Call (844) 761-8186 to schedule your free estimate – a live person answers, 24/7.
Written by the team at Shepherd & Sons Roofing Boulder City.