A Shepherd company - serving Boulder City, NV

Flashing Repair in Boulder City, NV

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Flashing Repair in Boulder City, NV

Flashing repair in Boulder City typically runs $250 to $850 for a focused fix around a chimney, vent, valley, or wall intersection, and most jobs are wrapped up in a single visit. Flashing is the metal – galvanized steel, aluminum, or copper – that seals the seams where your roof meets something that isn’t roof: a chimney, a skylight, a vent pipe, a wall. When those seams fail, water finds the path of least resistance and shows up inside your house far from where the actual leak started. That’s the part most folks miss. The stain on the ceiling in your living room might trace back to a chimney collar twenty feet away.

Shepherd & Sons Roofing Boulder City has been at the same address since 1996, and flashing is one of those jobs where the difference between a five-minute caulk-and-pray and a proper rebuild shows up two monsoons later. We’re locally owned and owner-operated, our license number is published, and Bill Shepherd’s name is on the work. If you’ve got water where it shouldn’t be, call (844) 761-8186 – a live person answers, day or night. For the bigger picture on what we do across the whole roof, start with our Roof Repair page.

Key Takeaways

  • Flashing repair in Boulder City usually costs $250 to $850, depending on how many seams are involved and whether the metal gets replaced or resealed.
  • Most leaks around chimneys, vents, and skylights are flashing failures – not shingle failures – even when the shingles look fine.
  • Boulder City’s intense sun and dramatic day-to-night temperature swings age sealant and metal faster than most homeowners expect.
  • We offer a Free Second Opinion on any written estimate and $40 Off Any Repair Over $200.

When You Need Flashing Repair

Not every leak is a flashing problem, but a lot of them are. Here’s what we look for, and what you can watch for yourself before you call anyone.

  • Water stains on the ceiling near a chimney. The chimney is the number one flashing failure point on most Boulder City homes. The counter-flashing that ties the chimney into the roof plane works loose over time, and the first hard rain after that shows up as a brown ring on your ceiling.
  • Rust streaks or pitted metal on the flashing itself. Our desert sun is brutal on galvanized steel. Once the galvanizing wears through, rust pits start, and those pits become pinholes. Pinholes become leaks. If you can see orange streaks running down the metal from the roof edge, it’s time to look closer.
  • Lifted, curled, or gapped flashing at a wall or valley. A valley flashing that’s pulled away from the shingles, or step flashing that’s separated from a sidewall, lets wind-driven rain straight under the roof surface. In Boulder City, the summer thunderstorms push rain sideways – that’s exactly the condition that finds a gap.
  • Water in the attic after a storm, especially near a vent pipe. Vent-pipe boots crack with age, and the rubber collar around the pipe splits. It’s a small part. It causes a lot of damage. We see this constantly on homes in the Historic District and the neighborhoods off Nevada Way.
  • Daylight visible in the attic along a roofline. If you can see light where the roof meets a wall or chimney from inside the attic, water can get in there too. That gap needs flashing, not just caulk.
  • Loose nails backing out around flashing. When flashing is nailed rather than properly integrated, the nails work loose with thermal expansion. Each loose nail is a hole.

If two or more of these sound familiar, it’s worth a look before the next storm. You can call us at (844) 761-8186 and we’ll come out, take a look, and tell you straight what we see.

Our Flashing Repair Process

We don’t guess at flashing. Here’s how a flashing repair actually goes when Bill and the crew get on your roof.

  1. We find the actual source of the leak. Not the stain – the source. That means getting up on the roof, checking the seams, and if needed doing a controlled water test to trace where water is entering. We’ve seen plenty of roofs where the obvious suspect wasn’t the culprit.
  2. We show you the deck and the flashing before we talk money. Photos of what we found, what’s failed, and what needs to happen. No surprise numbers at the door. That’s the whole point of an upfront price.
  3. We remove and rebuild the failed flashing. Depending on what’s there, that means pulling the old metal, cleaning the substrate, and setting new flashing properly integrated under the shingles – not just smeared with sealant. We install products from Owens Corning, IKO, and Atlas, so we know how the flashing needs to tie into the field shingles on those systems.
  4. We seal the seams and fasten everything to spec. Counter-flashing, step flashing, and the transition points get set so the metal moves with the roof rather than fighting it. The fasteners and the overlap pattern are what make flashing last – not the bead of caulk on top.
  5. We test our work before we leave. Water test at the repaired area. If it’s still leaking, we haven’t finished. Every roofing job we do carries the written 90-Day Done Right Promise – if it’s not right, one call brings Bill back.
  6. We clean up and walk you through it. No nails in the yard, no shingle scraps left behind. We show you what we did and answer whatever questions you’ve got.

Flashing Repair Pricing in Boulder City

What you pay depends on how many flashing points are involved and whether we’re replacing metal or resealing. Below are honest ranges. We give free estimates, so the exact number is always something you see in writing before we start.

Flashing Job Typical Range
Single vent-pipe boot replacement $250 – $400
Chimney flashing rebuild (one chimney) $450 – $850
Wall or step flashing repair (per linear section) $300 – $600
Valley flashing replacement $400 – $900
Skylight flashing reseal or rebuild $350 – $750
Full flashing inspection (credited toward repair) Free with repair

What moves the number up or down:

  • Number of flashing points. One vent boot is a quick job. Four leaks around a chimney, a skylight, and a vent in the same afternoon adds up.
  • Material. Standard galvanized steel is the budget option. Copper and premium metals cost more but last much longer in our sun.
  • Access. A steep pitch or a second-story roof takes longer to work safely than a walkable single-story.
  • Hidden damage. If water got under the flashing and rotted deck boards or fascia, that’s repair on top of repair. We won’t know until we get in there, and we’ll tell you before we touch it.

Standing offers that apply here: $40 Off Any Repair Over $200, a Free Second Opinion on any written estimate, and No Trip Charge Inside Our Own County. We also offer our Senior and Veteran 10% discount. For a full roof assessment where flashing is just one part of the picture, see our page on Roof Repair in Boulder City.

FAQs – Flashing Repair

How much does flashing repair cost in Boulder City?

Flashing repair in Boulder City usually runs between $250 and $850, depending on how many seams are involved. A single vent-pipe boot is typically at the low end; a full chimney flashing rebuild lands toward the top. Call (844) 761-8186 for an exact quote – the estimate is free and there’s no trip charge inside our own county.

Is it cheaper to repair the flashing or replace the roof?

Repair is almost always cheaper when the flashing is the only problem. A targeted flashing repair at $250 to $850 beats a full replacement every time. The question is whether the flashing failed because of age and sun, or because the roof underneath is failing too. That’s what a proper inspection tells you. We’ll give you the honest answer – if all you need is flashing, that’s all we’ll quote. Call (844) 761-8186 for a free look.

Can you come out today?

In many cases, yes. We answer the phone live 24/7, including nights and weekends after a storm, and we’ll tell you exactly when Bill can get out to your roof. For active leaks, we treat it as a priority. Call (844) 761-8186 and we’ll get you on the schedule.

How do I know if the leak is flashing or shingles?

Usually the location of the water inside the house tells part of the story, but only a roof inspection tells you for sure. Leaks that show up near a chimney, skylight, vent, or wall intersection are flashing failures more often than not. Leaks in the middle of a roof plane are more likely shingle or underlayment. We trace the source before we quote anything, and we show you the photos. Call (844) 761-8186 to schedule a look.

How long does flashing repair take?

Most flashing repairs are a single-day job. A vent boot is an hour or two on the roof. A chimney rebuild might take half a day depending on access and the condition of the surrounding shingles. We’ll give you a realistic time window before we start, not a guess.

Do you guarantee the flashing repair?

Every roofing job we do is backed by our written 90-Day Done Right Promise. If the flashing we repaired leaks again inside that window, one call brings Bill back to make it right. That’s how it’s always worked – same address since 1996, same name on the license.

If you’ve got a leak, a stain, or just want someone to look at the flashing before the next storm rolls through, pick up the phone. We’re Shepherd & Sons Roofing Boulder City, we answer live 24/7, and we’ll show you what’s wrong before we talk money. Call (844) 761-8186 for a free estimate. Our technicians have up to 30 years of experience, and when we say we’ll be there, we mean it.

Written by the team at Shepherd & Sons Roofing Boulder City, serving Boulder City.

Need Roofing help in Boulder City? Licensed & insured · free written estimates
Call (844) 761-8186
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Shepherd & Sons Roofing Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch