Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Specialty Roofing for Boulder City Homeowners
Historic Boulder City homes sit under a hard sun at 2,500 feet, with wind that funnels down from the McCullough Range and monsoon rain that arrives fast in July and August. A standard three-tab roof handles some of that. A specialty assembly handles all of it, and that’s what we build. Our crew has up to 30 years of experience setting low-slope membranes, solar-ready decks, and built-up roofs that hold up in this climate, and we bring that knowledge to every Boulder City job. Call (844) 761-8186 and a live person picks up, any hour, any day.
What Our Specialty Roofing Service Includes
Specialty roofing covers any roof that isn’t a plain asphalt shingle slope: flat and low-slope sections, decks prepped for solar, reflective membranes, and roof systems that must meet energy or HOA rules. In Boulder City we see a lot of flat porch roofs, patio covers, and additions that were never properly flashed, plus older homes near the historic district where a standard shingle won’t pass. Here’s what we install and repair.
Solar Ready Roofing
A solar-ready roof is a roof built with the mounting and wiring plan for panels worked out before the first shingle or membrane goes down. It matters most in Boulder City, where south-facing sun is strong and homeowners are adding solar at a steady clip. We plan the deck, the flashing points, and the penetration locations up front so you’re not cutting holes in a new roof later. If you’re adding panels, tell us first and we’ll build the roof to carry them.
TPO Roofing
TPO (thermoplastic polyolefin) is a single-ply white membrane common on flat roofs and additions. It reflects heat well, which matters here in August, and seams are heat-welded so they hold. We recommend TPO for low-slope sections over living space, patio covers, and garage roofs in Boulder City where you want a clean, reflective surface. We install it from Owens Corning, IKO, and other makers, and flash every edge and penetration by hand.
EPDM Roofing
EPDM is a black rubber membrane that has been on flat roofs for decades and takes a beating well. It’s a good fit for Boulder City’s flat sections and shaded patio roofs where heat buildup isn’t the main concern, and it holds up under UV and temperature swings. We install and repair EPDM across the city, including older homes near the historic district where a proven membrane is the safer call. Tell us the roof and we’ll tell you straight if EPDM or TPO is the better fit.
Modified Bitumen
Modified bitumen is a rolled asphalt membrane, often called mod-bit, that comes in cap sheet form and works well on low-slope roofs and small flat areas. It handles foot traffic better than some single-ply options and is a practical choice for Boulder City garage roofs and shed-style covers. We install it with proper base sheet and flashing, not just a rolled-out sheet with glued edges. Ask any bidder how they’ll terminate the edges before you sign.
Green Roof
A green roof puts a growing medium and plants over a waterproof membrane, which cuts heat gain and looks good on a flat section. In Boulder City’s dry climate it means planning irrigation and drainage carefully so the roof isn’t holding water it shouldn’t. We build these on flat roofs and patio covers where the structure can carry the load, and we check the span before we quote. If you’re curious what your roof can carry, we’ll measure it.
Built-Up Roofing
Built-up roofing (BUR) is layers of asphalt and reinforcing felt laid in alternating courses to build a durable, multi-ply surface. It’s a workhorse on flat commercial-style roofs and larger flat residential sections, and it lasts when installed right. We install BUR on Boulder City flat roofs and additions where a heavy, proven system makes sense. We’ll show you the ply count in the quote so you know what you’re getting.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Specialty Roofing
We install specialty roofing products from Owens Corning, IKO, Atlas, and Tamko, and we know where each one tends to wear first in this climate. Owens Corning and Tamko membranes and underlayments show up on a lot of Boulder City flat roofs, and we’ve repaired them enough to know their weak points at seams and terminations. IKO and Atlas systems are common on patio covers and additions around the historic district, and we know how those products handle our sun and monsoon cycles. When a roof fails early, it’s usually the flashing or the install pattern, not the brand, and we check both.
Whether your roof carries Owens Corning, IKO, Atlas, Tamko, or any other make, we can help. We’ll look at the assembly, not just the label, and tell you honestly whether it needs repair or replacement. That’s the same answer a neighbor would want, and it’s the one we give.
Signs You Need Specialty Roofing Right Now
Most specialty roofs don’t fail all at once. They give you warnings first. Here’s what to watch for in Boulder City, and why each one matters:
- Ponding water on a flat roof. Standing water after a storm means the slope or drainage is off, and it will find a seam fast. If water sits for more than a day, it’s time to call.
- Bubbles, blisters, or soft spots in the membrane. These are signs trapped moisture or failed adhesion under TPO or EPDM. Left alone, they spread and split at the seams.
- Rust streaks or loose flashing at edges and penetrations. Flashing is where most low-slope roofs leak first. In Boulder City’s wind, loose edges get worse quick.
- Sun-baked, chalky, or cracked surface on BUR or mod-bit. Our UV load wears these surfaces down over the years, and once they go chalky the protection is gone. That’s when cracks open.
- Panels planned or already mounted with no solar-ready deck underneath. If the roof wasn’t built for the load and the penetrations, you’ll be patching around hardware for years. We check the deck before we quote.
Our Specialty Roofing Process – Step by Step
- 1
We come out and look at the deck. Bill and his crew walk the roof, check the structure, and photograph any soft spots or prior patches. You see the photos before we talk money. If the deck can’t carry what you want, we tell you at this stage.
- 2
We measure and count squares. A roof is measured in squares, and we count them and give you the number. Ask any bidder how many they counted. You should get the same answer from all of them.
- 3
We write the quote in plain terms. Material, ply count or membrane type, flashing plan, and the price. No change orders. It’s free, and we’ll give you a second opinion on any other written estimate you’ve got.
- 4
We install and flash by hand. Seams and terminations get the attention, not the wide-open field. The nailing pattern and the flashing earn the water rating, not the product wrapper.
- 5
We walk it with you and back it in writing. Before we leave, you inspect the finished roof with us. Every job carries the written 90-Day Done Right Promise: if it’s not done right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Specialty Roofing Cost in Boulder City?
Specialty roofing costs more than a standard shingle tear-off because of the materials and the detailing. A typical TPO or EPDM flat section in Boulder City runs about $6 to $12 per square foot installed, depending on size and how much flashing is involved. Modified bitumen on a garage roof typically lands around $4 to $8 per square foot, and a built-up roof on a larger flat area runs $8 to $15 per square foot. Green roofs are the high end, often $20 to $40 per square foot because of the waterproofing, drainage, and growing medium. A small solar-ready prep on an existing roof might add $2,000 to $5,000 depending on the deck work.
What drives the price: the size and shape of the flat area, how many penetrations and edges need flashing, whether the deck needs repair, and the membrane you choose. To avoid overpaying, get the square count in writing, ask where the flashing plan is spelled out, and get a second opinion on any quote that feels high. Our estimate is free, and we’ll show you the deck photos before we quote. Call (844) 761-8186 for an exact quote.
Specialty Roofing Near Boulder City – Our Service Area
We take specialty roofing calls across Boulder City and the surrounding area, including Specialty Roofing in Henderson, Specialty Roofing in Whitney, Paradise, Enterprise, and Winchester. If you’re in one of those towns, we’ll be there and give you a straight answer on timing. Same address since 1996, and our own county gets no trip charge. You can also start at our home page to see everything we do.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Specialty Roofing in Boulder City
Specialty roofing is any roof system beyond a standard asphalt shingle slope, including flat and low-slope membranes like TPO, EPDM, and modified bitumen, built-up roofs, green roofs, and solar-ready assemblies. It’s used where shingles won’t work because of pitch, drainage, or a deck prepared for solar. We install all of these in Boulder City and tell you which one fits your roof.
A typical flat section or patio cover takes one to three days depending on size and deck condition. A larger built-up or green roof runs longer, often a week or more. We give you the timeline in the written quote, and we don’t rush a membrane cure. Plan for a short delay if rain shows up during monsoon season.
Most specialty jobs in Boulder City land between $4 and $15 per square foot for TPO, EPDM, mod-bit, and built-up systems, with green roofs at the higher end. Solar-ready prep adds cost depending on deck work. Call (844) 761-8186 for an exact quote. Estimates are free, and we’ll show you the deck photos first.
Yes, we work with Owens Corning, IKO, Atlas, and Tamko, among others. We know where these products wear first in our sun and wind, and we flash every edge and penetration by hand. If you’ve already got a quote from someone else, our Free Second Opinion will tell you straight. Whether it’s one of those brands or any other make, we can help.
Yes. A live person answers the phone 24/7, including nights and weekends after a storm, and we’ll be there to tarp or repair a failing specialty roof. Ponding water, split membranes, and storm damage don’t wait for business hours. Call (844) 761-8186 and we’ll get out to Boulder City.
Every specialty job carries the written 90-Day Done Right Promise: if it’s not done right, one call brings Bill back. That’s in writing on every roofing job, not just the big ones. Manufacturer warranties also apply to the products, depending on the system. We’ll spell out both in your quote.
Clear the work area, move vehicles out of the driveway, and secure pets before we arrive. We’ll cover what needs covering and walk you through the day’s plan before anyone starts. If you’re adding solar later, tell us up front so we can build the deck for it. Same address since 1996, and we’ll be there when we say.
Schedule Your Specialty Roofing Service in Boulder City Today
If your flat roof is ponding, the membrane is bubbling, or you’re planning solar and need a deck that’s ready, call us. Bill and his crew have up to 30 years of experience and a written promise on every job. We’ll show you the deck photos before we talk money, give you a free estimate, and a live person answers any hour. Call (844) 761-8186 to schedule your free estimate.
Written by the team at Shepherd & Sons Roofing Boulder City.