Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Metal Roofing for Boulder City Homeowners
Metal roofing in Boulder City is a different animal than it is in most of the Las Vegas Valley. Up here, you’re dealing with intense high-desert sun, wind that funnels off the McCullough Range, and temperature swings between summer afternoons and winter nights that punish any roof installed like a flatland subdivision. If you’re tired of patching asphalt every few years or a storm chaser left you a roof that’s already failing, we can help. Every metal job we do is backed by the written 90-Day Done Right Promise, and our technicians have up to 30 years of experience with standing seam, metal shingles, and repairs on every major panel type. Call (844) 761-8186 and a live person picks up, day or night.
What Our Metal Roofing Service Includes
We handle the full range of metal roof work in Boulder City, from a first-time install on a mid-century bungalow off Nevada Way to a repair on a shop roof out near the airport. Here’s what each service covers.
Standing Seam Metal Roof
Standing seam is the concealed-fastener panel system with raised ribs running down the slope, so there are no exposed screws to back out in the wind. It’s the right call when you want a roof that will outlast the mortgage and you’re willing to pay for the cleanest-looking install. On Boulder City’s low-slope and medium-slope homes, we measure panel runs against the actual roof geometry before ordering, because a seam that lands badly against a valley means water finds the wrong path. We install 24-gauge panels from Atlas and IKO and set clips to the engineering spec for this wind zone.

Metal Shingle Roofing
Metal shingles give you the look of a traditional roof with the lifespan of steel, and they’re a natural fit for the Historic District where the neighbors care how the street reads from the sidewalk. You want these when a homeowners’ group or design review cares about appearance but you refuse to re-roof every 15 years. We install stamped and stone-coated shingles from Tamko and Owens Corning’s metal lines, and we lay out the pattern before the first panel goes down so the courses stay straight across hips and ridges.

Corrugated Metal Roofing
Corrugated exposed-fastener metal is the workhorse: affordable, quick to install, and easy to repair. It makes sense for shops, garages, sheds, and budget-conscious homes where function beats finish. We source corrugated panels with the right gauge and profile for Boulder City’s sun load, and we set the fasteners with rubber washers to the manufacturer’s torque so they don’t crush the panel or leak at the hole. Every screw gets placed on the high rib, where the water can’t sit against it.

Aluminum & Steel Roofing
Aluminum is the rust-proof choice; steel is the strong, cost-effective one. Picking between them comes down to the slope, the budget, and how close you are to the lake or the washes where moisture hangs around longer. We walk you through the tradeoffs before you commit, including how each metal reacts to the expansion and contraction that comes with a 40-degree day-night swing. Both our aluminum and steel panels are coated systems rated for desert UV, and we match the coating to the exposure.
Metal Roof Repair
Leaks, lifted seams, backed-out fasteners, and dented panels from a hailstorm all get looked at panel by panel. Repair beats replacement more often than a storm chaser will tell you, and you’re entitled to a straight answer. We trace the actual leak with a hose test and look at the decking underneath, because a water stain inside rarely lines up perfectly with the hole outside. If a repair will hold, we say so; if the whole run is compromised, we show you why.
Metal Roof Coating
A reflective coating brings an older metal roof back to life and knocks down the heat coming through the ceiling in July and August. You want this when the panels are structurally sound but the finish is chalky or faded. We prep the surface, address any rust spots first, and apply a coating system matched to the metal type. It’s a fraction of the cost of replacement, and on a Boulder City roof that’s already shedding the sun, it’s often the smart move.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Metal Roofing
We install metal systems from Owens Corning and Tamko, and we’re familiar with the way each one wants to be set. Owens Corning’s metal shingles have their own nailing and interlock tolerances, and if a crew ignores them you get a roof that looks fine and rattles in the first big wind. Tamko’s stone-coated panels ask for careful handling at the cuts, because that’s where the coating chips if a crew gets careless with a saw.
We also work with Atlas and IKO panel systems and know where their products want extra attention at the seams and fastener lines. Whether you have an Owens Corning, Tamko, Atlas, or IKO roof – or any other make – we can help. Tell us the brand and we’ll tell you what we’ve seen go wrong on it and how to head it off.
Signs You Need Metal Roofing Right Now
Metal roofs don’t usually fail all at once. They give you warnings first. Watch for these:
- Fasteners backing out or rusting at the heads. When the screws start lifting, the next wind event turns them into leaks. A fastener walk-and-tighten is cheap; a water-damaged ceiling is not.
- Seams lifting or separating. A raised seam is the first place water gets in, and once it does, it runs under the panels where you can’t see it. If you can catch a fingernail under a seam, get it looked at.
- Dents or dimpling after hail. Not every dent leaks, but a field of them can crush the panel’s ability to shed water and shorten its life. We check the deck and the fasteners, not just the surface.
- Rust, chalky finish, or peeling coating. Chalking is the finish dying, and rust spots spread faster in Boulder City’s dry heat than most people expect. Coating early saves the panels.
- Interior water stains or ceiling sag near the eaves. A stain on the ceiling usually means the metal has been leaking for a while, and the decking may already be soft. That’s a repair-now situation.
Our Metal Roofing Process – Step by Step
- 1
Free inspection and second opinion. We get on the roof, measure the squares (ask any bidder how many they counted), and photograph the deck and the panel condition. If you have another written estimate, we’ll give you a free second opinion on it before you sign anything.
- 2
Line-item written estimate. You get the number in writing, itemized: panels, trim, fasteners, underlayment, tear-off, permits. No vague lump sum, no surprises once the crew is on the roof.
- 3
Permits and prep. We pull the required permits and schedule inspection, then protect the landscaping and set up fall protection before tear-off starts. On a re-roof we inspect the decking for rot and replace what’s soft.
- 4
Install with the right nailing pattern and underlayment. The wind rating is earned by the nailing pattern and clip spacing, not the wrapper on the box. We set panels to the manufacturer’s spec for this wind zone and check every fastener torque.
- 5
Final walk-through and the 90-Day Done Right Promise. We walk the roof with you, show you the photos, and hand over the written promise. If something isn’t right in those 90 days, one call brings us back to make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roofing Cost in Boulder City?
A typical standing seam metal roof in Boulder City runs $14,000-$28,000 for an average single-family home, depending on square footage, roof complexity, and whether you’re tearing off old roofing or going over a sound deck. A metal shingle roof usually lands in the $11,000-$22,000 range, and corrugated on a shop or garage runs $6,000-$14,000. Metal roof repair is typically $350-$2,500 for common fixes like fastener replacement, seam repair, or a small panel swap, and a coating system runs $3,000-$8,000 on a typical home roof.
What moves the price: the number of squares (how much actual roof you have), how many hips, valleys, and penetrations need trim, the panel gauge and coating you choose, whether the old roof comes off, and any decking that’s gone soft. The way to avoid overpaying is simple – get two written estimates, make sure both count the same squares, and ask for a second opinion if the numbers don’t line up. Our estimates are free, no-hassle, upfront, and there’s no trip charge inside our own county. Everything above is itemized before anyone touches your roof.
Metal Roofing Near Boulder City – Our Service Area
We cover Boulder City and the surrounding communities, including Metal Roofing in Henderson just down the hill, Metal Roofing in Whitney, and the rest of the Las Vegas Valley. Response times are quick across the Boulder City area – usually a day or two for a scheduled estimate, and we get out fast after a storm. If you’re over in Paradise, Enterprise, or Summerlin, we can still help, and you can start at our home page to see everything we do.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Metal Roofing in Boulder City
Metal roofing is a roof made of steel or aluminum panels or shingles instead of asphalt, and it’s built to last decades longer than a shingle roof. It comes in several forms: standing seam panels with hidden fasteners, stamped or stone-coated metal shingles, and exposed-fastener corrugated panels. In Boulder City’s high-desert climate, metal’s ability to reflect the sun and handle big temperature swings is a real advantage over asphalt.
Most residential metal roof installs in Boulder City take three to seven days of working time, depending on square footage and roof complexity. A simple corrugated shop roof can go up in two or three days; a complex standing seam home with lots of hips and valleys runs toward the upper end. Weather and permit timing factor in, and we give you a realistic window in the written estimate.
A standing seam roof typically runs $14,000-$28,000, metal shingles $11,000-$22,000, and repair work $350-$2,500 depending on the fix. The main factors are how many squares, panel type and gauge, trim complexity, and whether tear-off and decking replacement are needed. Call (844) 761-8186 for an exact quote – estimates are free and itemized in writing.
Yes, we work on Owens Corning, Tamko, Atlas, and IKO metal systems regularly, along with other makes. Each brand has its own interlock, fastener, and coating requirements, and knowing those keeps a repair from turning into a bigger problem. If you know the brand, tell us; if not, we’ll identify it on the roof.
Yes, we take emergency and storm-damage calls around the clock – a live person answers the phone 24/7, including nights and weekends after a storm. When a metal roof springs a leak, the fix is often stopping the water from spreading before it damages the deck and drywall. Don’t wait on a voicemail or a call center – call (844) 761-8186 and get a real person.
Every metal roofing job comes with our written 90-Day Done Right Promise: if something isn’t done right, we make it right, and one call brings us back. Material warranties come from the panel manufacturer and vary by brand and coating, which we spell out in writing on your estimate. We put the promise in writing so you’re not relying on a handshake you can’t hold anyone to.
Clear the driveway and the area around the house so the crew has room to stage materials and set ladders, and move vehicles out of the work zone. Let us know about pets and anything fragile near the eaves, and if there’s attic access, have it clear so we can inspect the deck from below. You don’t need to do anything else – we handle the rest, and Bill will come out and show you the deck photos before you talk money. Visit our Metal Roofing in Boulder City page, our Henderson metal roofing page, or our Whitney metal roofing page to see more, and check our metal roofing overview for the full picture.
Schedule Your Metal Roofing Service in Boulder City Today
Whether you need a repair, a coating, or a full standing seam install, we’ll give you a straight answer and a written price before anyone touches your roof. Same address since 1996, a license number you can look up, and a live person on the phone around the clock. Call (844) 761-8186 to schedule your free, no-obligation estimate.
Written by the team at Shepherd & Sons Roofing Boulder City.